Cisco Blogs


Cisco Blog > Mobility

Increasing Demand for Higher Location Data Resolution

Cisco has been playing a critical part for retail, healthcare, hospitality and transportation organizations to gain an understanding of how end-users move throughout an organization’s physical location. This is done through our Cisco Connected Mobile Experiences (CMX) solution.

With all the valuable information CMX provides, the demand for even more accurate data has been growing. Location accuracy has been a hot developing field and, as I mentioned in announcing our Best of Interop Finalist status in the wireless category last week, Cisco’s taken the lead in redefining how this location-based data is acquired.

In the past many solutions have relied on the probing performed by the mobile device to acquire location-based data.  In recent months this approach has shown diminishing returns. The underlying issue is that this data is reliant on how frequently the mobile device probes an access point. A couple issues that arise include:

-       Mobile device manufacturers are reducing the frequency of device probing to conserve battery. This reduces the number of data points collected and impacts the accuracy of the data

-       Different manufacturers probe the access point with varying frequency so some devices deliver more accurate information than others skewing the location analytics data.

At Cisco’s annual Partner Summit event we are revealing some key areas of focus for the upcoming Cisco v8.0 release. Although the list is not inclusive of all new functionality, I would like to highlight some steps we are taking to bring CMX to meet the ever-evolving demand for location-based data.

Step 1: Increasing Data Resolution Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

CMX Analytics: An Inside Scoop on CiscoLive! Milan #CLEUR

cmxclmilan1

Today is the final day of a very busy and successful Cisco Live Milan 2014. Read my initial observations from the event earlier this week.

As the event draws to a close, lets look at some of the location analytics available via Cisco’s Connected Mobile Experiences solution (CMX) and perhaps try to answer some of the following questions about the event.

For this I will just focus on the World of Solutions Show floor -- approximately 800,000 sq feet in size, and containing all the Cisco Booths and the partner displays.

  1. How many people actually visited the world of solutions?
  2. How many people did  the different Cisco Booths attract?
  3. Where was the busiest part of the show floor?

These and other insights can be derived from looking at the business intelligence that emerges from CMX. Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

HDX Blog Series #4: Optimized Roaming

Editor’s Note: This is the last of a four-part deep dive series into High Density Experience (HDX), Cisco’s latest solution suite designed for high density environments and next-generation wireless technologies. For more on Cisco HDX, visit www.cisco.com/go/80211ac.  Read part 1 here. Read part 2 here. Read part 3 here.

If you’ve been a long time user of Wi-Fi, at some point you have either observed someone encounter (or have personally suffered from) so called “sticky client syndrome”. In this circumstance, a client device tenaciously, doggedly, persistently, and stubbornly stays connected to an AP that it connected to earlier even though the client has physically moved closer to another AP.

Surprisingly, the reason for this is not entirely…errr…ummm…unreasonable. After all, if you are at home, you don’t want to be accidentally connecting to your neighbor’s AP just because the Wi-Fi device you’re using happens to be closer to your neighbor’s AP than to your own.

However, this behavior is completely unacceptable in an enterprise or public Wi-Fi environment where multiple APs are used in support of a wireless LAN and where portability, nomadicity, or mobility is the norm. In this case, the client should typically be regularly attempting to seek the best possible Wi-Fi connection.

Some may argue that regularly scanning for a better Wi-Fi connection unnecessarily consumes battery life for the client device and will interrupt ongoing connectivity. Therefore the “cure is worse than the disease”. But this is true only if the client is very aggressively scanning and actually creates the complete opposite of being “sticky”.

The fundamental issue with “stickiness” is that many client devices simply wait too long to initiate scanning and therefore seeking a better connection. These devices simply insist on maintaining an existing Wi-Fi connection even though that connection may be virtually unusable for anything but the most basic functionality. Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

HDX Blog Series #3: 802.11ac Beamforming At Its Best: ClientLink 3.0

Editor’s Note: This is the second of a four-part deep dive series into High Density Experience (HDX), Cisco’s latest solution suite designed for high density environments and next-generation wireless technologies. For more on Cisco HDX, visit www.cisco.com/go/80211ac.  Read part 1 here. Read part 2 here.

The 802.11ac wireless networking standard is the most recent introduction by the IEEE (now ratified), and is rapidly becoming more accepted and reliable industry standard. The good news is that the client and vendor adoption rate for 802.11ac is growing at a much higher pace as compared to when 802.11n was introduced back in 2009. There has been an accelerated growth seen with the mobile and laptop devices entering the wireless market embedded with an 802.11ac WiFi chipset. Unlike in the past, laptop, smartphone and tablet manufacturers are now acknowledging the fact that staying up to date with the latest Wi-Fi standards is as important for the bandwidth hungry users as having a better camera or a higher resolution display.

With the launch of the new 802.11ac AP 3700, Cisco introduces the Cisco HDX (High Density Experience) Technology. Cisco HDX is a suite of solutions aimed towards augmenting the higher performance, more speed and better client connectivity that 802.11ac standard delivers today.

ClientLink 3.0 features as an integral part of Cisco HDX technology designed to resolve the complexities that comes along with the new BYOD trend driving the high proliferation of 802.11ac capable devices.

So what is ClientLink 3.0 technology and how does it work?

ClientLink 3.0 is a Cisco patented 802.11ac/n/a/g beamforming technology Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

[Cartoon Catalyst Blog Series] K-12 BYOD. Secure Students, Determine Internet Access, and Yet Provide Awesome Network Performance?

Students bounding into schools touting the latest device is creating big problem for K-12 IT departments. How can schools support BYOD initiatives while securing these mobile devices and the student information embedded within them if IT staff numbers aren’t growing?

In his latest blog, K-12 BYOD. Secure Students, Determine Internet Access, and Yet Provide Awesome Network Performance?, Cisco’s Rahul Chohan discusses how Identity Services Engine policy deployment as a part of Cisco BYOD Solutions for K12 Education helps simplify mobile device security streamlines the IT security processes required to deploy BYOD. Rahul’s blog covers how ISE helps protect minors, ensure performance, and simplify IT over the wired and wireless infrastructure. How exactly can it do this? You’ll have to read his blog to find out.

For more on Cisco BYOD Solutions for K12 Education page.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,