Cisco Blogs


Cisco Blog > Data Center

Enabling Data Center Services with RISE : Remote Integrated Services Engine

Data Centers are becoming increasingly smart, intelligent and elastic. With the advancement in cloud and virtualization technologies, customers demand dynamic workload management, efficient and optimal use of their resources. In addition the configuration and administration of Data Center solutions is complex and is going to become increasingly so.RISE

With these requirements and architectures in mind we have a industry first solution called Remote Integrated Service Engine (RISE).  RISE is a technology that simplifies provisioning, out of box management of service appliances like load balancers, firewalls, network analysis modules. It makes data center and campus networks dynamic, flexible, easy to configure and maintain.

RISE can dynamically provision network resources for any type of service appliance (physical and virtual form factors). External appliances can now operate as integrated service modules with Nexus Series of switches without burning a  slot in a switch . This technology provides robust application delivery capabilities that accelerate the application performance manifold.

RISE is supported on all Nexus Series switches with services like Citrix NetScaler MPX, VPX, SDX and Cisco Prime NAM with many more in the pipeline.

Advantages & Features

  1. Simplified Out-of-Box experience : reduces the administrator’s manual configuration steps from 30 to 8 steps !!
  2. Supported on Citrix NetScaler MPX, SDX, VPX, and Nexus 1KV with VPX
  3. Supported on Cisco Prime Network Analyzer Module
  4. Automatic Policy Based Routing – Eliminates need for SNAT or Manual PBR
  5. Direct and Indirect Attach mode integration
  6. Show module for RISE
  7. Attach module for RISE
  8. Auto Attach – Zero touch configuration of RISE
  9. Health Monitoring of appliance
  10. Appliance HA and VPC supported
  11.  Nexus 5K/6K support (EFT available)
  12. IPV6 support (EFT available)
  13. DCNM support
  14. Order of magnitude OPEX savings: reduction in configuration, and ease of deployment
  15. Order of magnitude CAPEX savings: Wiring, Power Rackspace and Cost savings

For more information, schedule an EFT or POC Contact us at nxos-rise@cisco.com

Resources

RISE press release on Wall Street Journal : http://online.wsj.com/article/PR-CO-20140408-905573.html
RISE At A Glance white paper: http://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/at-a-glance-c45-731306.pdf
RISE Video at Interop: https://www.youtube.com/watch?v=1HQkew4EE2g
Cisco RISE page: www.cisco.com/go/rise
Gartner blog on RISE: “Cisco and Citrix RISE to the Occasion”: http://blogs.gartner.com/andrew-lerner/2014/03/31/cisco-and-citrix-rise-to-the-adc-occasion/

Tags: , , , , , , , , , , , , ,

ITD: Load Balancing, Traffic Steering & Clustering using Nexus 5k/6k/7k

best

Data traffic has grown dramatically in the recent years, leading to increased deployment of network service appliances and servers in enterprise, data center, and cloud environments. To address the corresponding business needs, network switch and router architecture has evolved to support multi-terabit capacity. However, service appliance and server capacity remained limited to a few gigabits, far below switch capacity.

Cisco Intelligent Traffic Director (ITD) is an innovative solution to bridge the performance gap between a multi-terabit switch and gigabit servers and appliances. It is an hardware based multi-terabit layer 4 load-balancing, traffic steering and clustering solution on the Nexus 7000 and 7700 series of switches.

Read More »

Tags: , , , , , , , , , , , , , , ,

Interop Redux: A Look at the New RISE Capability with Citrix NetScaler and Nexus 7000

Just prior to Interop about two weeks ago, Cisco unveiled its Remote Integrated Services Engine (RISE) on the Nexus 7000 series switch. Remote Integrated Service Engine (RISE) is a new protocol being added to the Nexus 7000 and 7700 platforms through NX-OS (software upgradeable to existing devices), that integrates external service appliances attached to Nexus 7000 Series switches with the same benefits as if the appliance was directly connected to the switch backplane, just like a dedicated service module. Initially, Citrix NetScaler Application Delivery Controllers (ADC) and the Cisco Prime Network Analysis Module (NAM) are the first services appliances that have integrated with RISE, and have been tested and Certified as “RISE-enabled”. With the announcement of RISE, we expect to develop an ecosystem of partners that will work with Cisco to take advantage of this technology, including other application services vendors and firewalls.

At Interop, I had a chance to meet up on the show floor with Citrix NetScaler Product Manager, Joe Peck, to talk about why Citrix is taking advantage of this new RISE technology.

But wait there’s more… Read More »

Tags: , , , , ,

Nexus 7000 RISE Improves Network Integration for Cisco Prime NAM

Last week was a busy week in Las Vegas at another eventful Interop. In addition to our new announcements around ACI, we’ve been busy showing off our new Remote Integrated Services Engine (RISE) capability we introduced for the Nexus 7000 Series switch. Our introductory series on RISE concludes with a look at how RISE facilitates network integration of Cisco Prime Network Analysis Module (NAM) through the Nexus 7000.

Following our initial blog announcement last week, Andrew Lerner at Gartner took time from a busy Interop week to provide a nice blog on the RISE integration with Citrix NetScaler as well, which I encourage you to read here.

If you recall from my earlier posts here and here, RISE is the new protocol in the Nexus 7000 and 7000 Series switch that allows integration of a remote service appliance like NAM or an application delivery controller with the same functional capability as if it was attached to the switch backplane like an embedded services blade. Devices can actually be connected over any layer 2 network, and not necessarily directly connected to the Nexus switch ports, although that is the usual configuration. RISE-enabled ports are configured on the Nexus 7000 and up to 4 dedicated ports per appliance can be configured for maximum throughput to connected devices.

It’s a great benefit for appliance vendors to not have to develop specific network-embedded modules of their products to install inside the chassis, as well as saving valuable slots while providing the same degree of traffic visibility and optimization for the appliance. In this video, I had a chance to sit down with Praveen Chandra, Director of NAM Engineering at Cisco, to talk about the first Cisco service appliance to support RISE and what it means for Prime NAM customers:

Tags: , , , , ,

New Remote Integrated Services Engine (RISE) Enhances L4-7 Appliance Integration with Nexus 7000 Series

Remote Integrated Service Engine (RISE) is a new protocol being added to the Nexus 7000 and 7700 platforms through NX-OS (software upgradeable to existing devices), that integrates service appliances to be attached to Nexus 7000 Series switches with the same benefits as if the appliance was directly connected to the switch backplane, as if it were a dedicated service module. Cisco RISE establishes a communication path between the network data plane and the service appliance, simplifying deployments and optimizing data paths with better traffic visibility within the data center.

RISE Logical View

RISE allows a physical services appliance to be connected to the Nexus 7000 switch as if it was directly connected to the chassis backplane, providing greater traffic visibility and optimization, with simplified connectivity

Initially, Citrix NetScaler Application Delivery Controllers (ADC) and the Cisco Prime Network Analysis Module (NAM) are the first services appliances that have integrated with RISE, and have been tested and Certified as “RISE-enabled”. With the announcement of RISE, we expect to develop an ecosystem of partners that will work with Cisco to take advantage of this technology, including other application services vendors and firewalls.

The service appliances (e.g., Citrix NetScaler and Cisco Prime NAM) are directly attached by standard network cable to RISE-configured ports on the Nexus 7000 Series switches in a typical virtual Port Channel (VPC) deployment. Appliances can also be attached in indirect mode through any switched (Layer 2) network. Either scenario (direct or indirect connection) allows for device and data path redundancy for fault tolerance.

There are several management advantages to connecting service nodes through RISE. First, RISE can be configured through the Nexus management console or management platform. However, the specific service appliance features are still configured using the existing device management tools.  This ensures separation of duties between the networking and security or application teams, as well as eliminating any additional management complexity from the RISE connection.

Joe Weber“RISE offers a unique ability to tightly couple Nexus 7000 Series switches and Service Appliances within the Data Center.  We believe that this integration will provide the business agility from an operational and deployment perspective that Data Center engineers have been looking for to reduce the time it takes to instantiate new or modify existing services.  Data-path optimization through the use of Auto-PBR (Policy Based Routes) will relieve the need for manual modifications during add/moves/changes and improve network traffic visibility for the Security/Server administrator.”  — Joe Weber, Technical Solutions Architect, World Wide Technology

Read More »

Tags: , , , ,