The Cisco® Remote Integrated Services Engine (RISE) allows both physical and virtual external service appliances to be attached to the Cisco Nexus® 7000 Series Switches and gain the same benefits as if the appliances were directly connected to the switch backplane like a dedicated service module. Cisco RISE provides a bidirectional control plane for tightly coupling network services to data center switching. Cisco RISE establishes a communication path between the network data plane and the service appliance, simplifying deployment and optimizing data paths with better traffic visibility in the data center. RISE is supported Cisco Prime NAM, Citrix NetScaler 1000v, Citrix NetScaler VPX, Citrix NetScaler MPX, Citrix NetScaler SDX etc.
Interested in knowing more about Cisco®RISE . The engineering team will showcase demos of some of the innovative features being designed for the Nexus 2K to 7K platforms. These are 15-30min Software Demos performed by our technical leaders. Please stop by our booth or visit the Nexus Data Center Whisper suites to watch the live demo and get some free goodies.Email questions to: email@example.com
Cisco Prime Network Services Controller 3.2.2 is available for download, follow this link to download the software and documentation. The 3.2.2 release incorporates a number of new features on top of 3.2.1 release. Refer to an earlier blog for the features introduced in 3.2.1 release. Following video provides a brief introduction to Prime Network Services Controller.
Following are some of the key capabilities introduced in Cisco Prime Network Services Controller 3.2.2 release:
Prime Network Services Controller operating in OpenStack environment supporting Edge Router and Load Balancer network services
License automation for CSR 1000V, Citrix NetScaler VPX and Citrix NetScaler 1000V
Automatic instantiation of Compute Firewall, Edge Router and Load Balancer network services with Dynamic Fabric Automation
The Cisco Prime Network Services Controller 3.2.1 supports Microsoft Hyper-V and VMware vSphere environments. Prime Network Services Controller 3.2.2 extends multi-hypervisor capabilities by introducing the support for OpenStack (KVM) in addition to Microsoft Hyper-V and VMware vSphere.
The Cisco Prime Network Services Controller team is pleased to announce the availability of 3.2 release. This release incorporates a number of new features and functionalities to build virtual data centers (VDCs) with various network topologies. Follow this link to download the software and documentation.
Designed for multi-tenant cloud deployments, Cisco Prime Network Services Controller offers scalable, and automation-centric management for virtualized data center and cloud environments. The Cisco Prime Network Services Controller is a virtual appliance that provides centralized device and policy management of virtual networking services. It provides a unified northbound API (XML payload over HTTPS) to allow the creation of dynamic data center that includes switching, routing, fire-walling and load-balancing functions.
Cisco Prime Network Services Controller is built on an information-model architecture in which each managed device is represented by its subcomponents (or objects), which are parametrically defined. It also uses Services profiles for model-based configuration of virtual devices policies. A service profile is a collection of device policies and configuration templates that can be predefined and applied on demand at the time of virtual appliance instantiation or later. Cisco Prime Network Services Controller enables
Flexible and simple mechanism to managing virtualized infrastructure using Cisco VSG, Cisco ASA 1000V, Cisco CSR 1000V virtual services as well as Citrix’s NetScaler virtual load balancers (NetScaler VPX and NetScaler 1000V)
Cisco InterCloud for virtual machine (VM) workload management and migration between the enterprise data center (private cloud) and public clouds
Cisco VSG, Cisco ASA 1000V, Cisco CSR 1000V, NetScaler VPX and NetScaler 1000V services in Dynamic Fabric Automation (DFA) solution
If you live in the US, I hope you had a good 4th of July holiday last week. It’s already been over a week since a very exciting Cisco live! If you were there in person, or you caught much of it on video, I’m sure you know about the enthusiasm and excitement from an unexpectedly large number of attendees. Crowds in the World of Solutions were amazing, especially trying to learn about our new Cisco Dynamic Fabric Automation (DFA) technology, as well as the new enhancements in our Nexus 1000V virtual networking portfolio, like Citrix NetScaler 1000V.
While on the Nexus 1000V topic, I would like to point out a great blog write-up by the always insightful Jason Edelman, a Solution Architect at a national solution provider, on our Nexus 1000V InterCloud hybrid cloud solution. Nexus 1000V InterCloud received a great deal of interest and attention at Cisco live and may have been the busiest pod in our virtual networking area in the World of Solutions. The concept of hybrid cloud is really gaining traction and organizations appreciate the importance of now seamlessly extending virtual overlays from the on-premises data center to public cloud providers as Nexus 1000V InterCloud now enables. Nexus 1000V InterCloud began shipping last week, as well (with vPath and the Virtual Services Gateway coming soon), so the timing of all this interest couldn’t be better. To download the Nexus 1000V InterCloud GA image for evaluation, go here.
One of the aspects of InterCloud that we were talking about in more detail at Cisco live! was the internal security. The architecture supports complete encryption of all traffic not only between the enterprise or on-premises data center and the service provider cloud, but encrypts all data-in-motion within the provider cloud, to protect traffic from exposure to the service provider and other tenants. This encrypted tunnel includes all traffic going to the virtual services residing in the cloud. And this is on top of the security provided by the virtual services (when supported in InterCloud in Q4 CY 13), such as the virtual firewalls, VSG and ASA 1000V Cloud Firewall.
Cisco live is here and the news and awards around the Nexus 1000V cloud networking and services platform just keep rolling in. Last week we announced the Citrix NetScaler 1000V virtual application delivery controller, which will be sold by Cisco. The Microsoft Hyper-V version of Nexus 1000V was officially released this month, and just like its VMware vSphere companion, there is a free version users can download and deploy. On the heels of its release the Nexus 1000V for Microsoft Hyper-V won the Best of Show in the virtualization category at Microsoft’s Tech Ed Conference.
There’s lots of new stuff to talk about Cisco live as well. If you recall, in February I discussed enhancements that Cisco was making in the Nexus 1000V portfolio to eliminate the requirement in VXLAN for IP Multicast. [Those enhancements are now shipping in a new Nexus 1000V release 2.2, full code string 4.2(1)SV2(2.1).] This new version even supports virtual switching for up to 128 hosts and 4096 virtual ports for greater scalability.