Ten Cisco products achieve IPv6 Certifications!

December 12, 2011 - 2 Comments

The Cisco Global Certification Team (GCT) is proud to announce the completion of USGv6 and ReadyLogo Phase 2 certifications for the following Cisco products:

  • 4500-SUP7E USGv6 and ReadyLogo Phase 2
  • ISR-G2 IPSec ReadyLogo Phase 2
  • Linksys E4200 USGv6 and ReadyLogo Phase 2
  • 79xx IP Phone USGv6 and ReadyLogo Phase 2
  • ACE4710 USGv6 and ReadyLogo Phase 2
  • ACE 30 blade for 6500 USGv6 and ReadyLogo Phase 2
  • ACE 30 blade for 7600 USGv6 and ReadyLogo Phase 2
  • Sx200 SOHO switch USGv6 and ReadyLogo Phase 2
  • Sx300 SOHO switch USGv6 and ReadyLogo Phase 2
  • ASR1K ReadyLogo USGv6 (retest) and ReadyLogo Phase 2

Today, all civilian agency networks are required by law to be IPv6-capable. Cisco is playing a key role in driving that transition from IPv4 to IPv6 by providing IPv6-capable products and architectures to our government customers. Cisco is an active member in USGv6, DoD and the IPv6 Ready Program certifications.

Information on the USGv6 program can be found at: http://www.antd.nist.gov/usgv6/testing.html

A complete list of products certified for USGv6 can be found at https://www.iol.unh.edu/services/testing/ipv6/usgv6tested.php

Additionally, information on the ReadyLogo program can be found at http://www.ipv6ready.org/

In an effort to keep conversations fresh, Cisco Blogs closes comments after 60 days. Please visit the Cisco Blogs hub page for the latest content.


  1. What is GCT?

    • My apologies sir! GCT is the Global Certification Team. I have clarified and updated. Thanks!