Cisco’s newest 802.11ac product, the Aironet 3700 Series Access Point is now orderable and shipping in the next few weeks. The AP 3700 features an integrated 11ac radio with a 4×4 architecture and Cisco’s High-Density Experience (HDX) Technology. HDX is a suite of features specific to the AP 3700 that delivers the best possible user experience, especially in high client density networks. HDX is enabled by a combination of hardware and software features on the AP 3700, features including:
- CleanAir 80 MHz – Interference detection and mitigation
- ClientLink 3.0 – RF link quality
- Smart Roam – Intelligent roaming handoff
- Turbo Performance – Performance with high client density
Aruba recently launched their 802.11ac access point, the AP-220 series, featuring a 3×3 design.
Miercom recently published a third-party evaluation of the performance between the AP 3702i and the AP-225. The report consists of a diverse range of test cases meant to gauge real-world performance of the access points. The tests include; multi-client performance, single client rate vs. range, performance in the presence of interference, and performance on reduced power. Here are some of the highlights from the report.
The AP 3700 performed very well in the multi-client performance test, thanks impart to HDX Turbo Performance. With 60 clients, the AP 3702i had a 6x performance advantage over the AP-225. The AP-225 struggled to serve all the clients and only mustered 40 Mbps total. The AP 3702i was able to transmit a healthy 236 Mbps, while maintaining fair throughput to each client.
The test consisted of 60 11ac clients, all associated to the 5 GHz radio. The clients used were 10 Dell E6430 laptops with Broadcom 4360 three spatial-stream chips, 20 Apple Macbook Air two spatial-stream laptops, and 30 Dell E6430 laptops with Intel 7260 two spatial-stream chips. Clients were setup in an open office environment surrounding the AP. Distances varied from 10’ to 50’.
Read More »
Tags: #80211ac, 11ac, 3x3, 3x3 design, 802.11ac, access point, AP under test, AP-225, apple macbook air, APUT, aruba, broadcom 4360 chip, Cisco, cleanair, ClientLink, dell E6430 laptop, GHz radio, gigabit, gigabit wireless, high density experience, interference detection, macbook air, mbps, Mhz, Miercom, multi-client, network, performance test, PoE+, reduced power, report, third-party evaluation, wi-fi, wi-fi testing, wifi, wireless
Mobility comes down to the lines between online and offline blurring rapidly, with organizations sprinting to put the infrastructure in place to catch up with the trend.
The blurring of the online and offline is happening all around us in a bi-directional manner – where the customer expects to interact with the business however and whenever they wish and get the same experience regardless of where they are or what they are doing- and for the business to be able to deliver exactly the same information and services to the customer regardless of how or where they choose to interact.
Is this new? Maybe not, but the O2O (online to offline) concept was truly brought it to life by the Tokyo Metro and their recently launched innovative offering for consumers.
Tokyo Metro carries 6.22 million passengers daily. This past September they announced a new service with two partners: the convenience store operator 7-11 Japan and the Ito-Yokado supermarket chain. Read More »
Tags: 7-11, coupon, Hotspot, Japan, location, metro, network, o2o, offline, online, seven eleven, subway, tokyo, tokyo metro, wi-fi, wifi, wireless
In the last MSE blog, Reddy Babu talked about the new Location Aware Guest Captive Portal powered by the Mobility Services Engine (MSE). The MSE was first introduced to provide location based information as a core service to the network, but has since built out a suite of location-based services that take the location-based data from the wireless network to the next level. These services are collectively known as the Cisco Connected Mobile Experiences (CMX) solution. As you read in Dr. Brendan O’Brien’s blog last week, we have been introducing more and more features to the CMX solution.
Today I will expand on one of these new features offered by the Connected Mobile Experiences solution: Browser Engage – which is our new network based location and context aware orchestration platform.
Browser Engage allows organizations to customize the web browsing experience for mobile users in their venue by offering various context-aware value added services. These services, such as indoor navigation and search, are available to the mobile user throughout their mobile web browsing experience. Browser Engage also helps organizations setup their content and serve them to the users based on device location. For example, an organization can deliver coupons or deals to mobile users based on their location within the venue—making the offerings much more relevant to the mobile end user. Imagine yourself in a mall and a deal shows up on your phone right around lunchtime that is valid at a food court right around the corner.
So, how does it work? Read More »
Tags: Cisco, connect, connected mobile experiences, context-aware, customer experience, guest experience, location, location based services, location-aware, location-based, mobile, mobile browser, mobility, network, technology, wi-fi, wifi, wireless
The guys from No Strings Attached Show just published their podcast we sponsored featuring Jim Florwick yesterday and already the verdict is in: Jim Florwick is awesome.
For those of you who haven’t had the chance to download the podcast yet (What are you waiting for?! Download podcast) or you have a few extra minutes to scan a short blog to decide whether or not you want to download the podcast, I asked Jim what his key takeaways are when it comes to high density design.
Here are Jim Florwick’s 6 tips for HD network design (for the REAL meat, tune into the podcast):
- High density client environments are quite common with today’s users being very connected – today’s users are always connected. With planning, this can be managed quite successfully. Understand the limitations, be aware of how legacy requirements will affect the outcome, and set expectations accordingly. Efficiency is key and removing some of the blockers (legacy) first is essential.
- 802.11ac represents another quantum leap forward in technology and will eventually allow a much richer user experience. It is a transition that must be managed and balanced against your current mission requirements. Evaluate channel/bandwidth requirements carefully. Monitor the mix of client devices operating in your environment and update frequently. Read More »
Tags: 11ac, 802.11, 802.11ac, access point, antenna, bandwidth, Cisco, CLI, client environment, design guide, HD, high density, high density design, high density network, jim florwick, legacy requirements, Mhz, Network design, no strings attached show, OBSS requirement, podcast, RRM; DCA algorithm, technology, wireless design
With the explosion of smart mobile devices, consumers expect to have Wi-Fi access at pubic venues everywhere they go. Venue owners are under pressure to provide reliable Wi-Fi guest access in a simple and easy way. Wouldn’t it be great to be able to do that AND extract some value out of your investment in setting up the Wi-Fi network as well? Cisco Connected Mobile Experience (CMX) is an industry leading solution provides just that: an easy, customizable and location-aware way to onboard guests using CMX Connect, an ability to gain insights into guest behaviors using CMX Location Analytics and an opportunity to engage guests in meaningful ways using CMX Browser Engage.
With MSE Release 7.6 coming out later this year, we wanted to give you a closer look at new feature CMX Connect. Read More »
Tags: Cisco, connect, connected mobile experiences, customer experience, guest access, guest captive portal, guest experience, guest portal, location, location based services, location-aware, location-based, mobility, mobilt, network, technology, wi-fi, wifi, wireless