Johns Hopkins Medicine is one of the leading health-care providers in the US. The Johns Hopkins University School of Medicine is consistently ranked as one of the top Medical Schools in the US and the Johns Hopkins Hospital is consistently ranked #1 in the US for 21 years in a row! In a previous blog in 2012, we described how the Cisco Wireless LAN controller 7.5 release enables wireless networks to recover with no client re-authentication in the event of a primarily controller failure. In this blog, I will share more details about unified access deployment at the Johns Hopkins Hospital with particular focus on the High Availability design.
Patients are the focus at Johns Hopkins Hospital. Johns Hopkins uses state-of-the-art technology in their hospitals to ensure that patients get the latest advances from surgical tools, radiologic imaging suites with the best diagnostic capabilities to something as humane as sound-absorbing private rooms for each patient. Read More »
Tags: access, aireOS, blade, Cisco, client, controller, deployment, design, device, diagnostic, equipment, health care, healthcare, High Availability, hospital, IOS, johns hopkins, LAN, mdf, medical, Mission Critical, mobility, NCV, network, patient, re-authentication, release, text, unified, Voice, voip, vss, wi-fi, wifi, wireless, WiSM2, wlan
HITEC 2014 takes place this week in Los Angeles, where the brightest minds and hottest technology in the Hospitality industry congregate in one place, with over 300 companies displaying the latest technology solutions to the industry.
CMX is featured at the HITEC Convention in both the Cisco booth and as a part of the Hyatt keynote address.
Cisco CMX @ HITEC
Cisco’s CMX solution was on display at the Cisco Booth and also running at the event venue the Los Angeles Convention Centre.
The following screen shots show some examples of the analytics in action at the show.
This is a heat map of devices during the early part of the morning when the exhibition flow first opened, and the delegates can be seen streaming in the front entrance and then spreading out across the show floor. We can also see that over 3000 devices have already been detected at the venue.
Read More »
Tags: #HITEC2014, analytics, Cisco, client, cmx, convention, count, customer, data, density, device, event, exhibition, FLOW, Guest, heat map, heatmap, hitec, hospitality, hotel, hyatt, Industry, location, location-based, loyalty, mse, solution, technology, travel, wi-fi, wireless
Cisco CMX Mobility Developer Challenge is under way at topcoder. CMX Mobile Application SDK can be leveraged in a mobile application to provide indoor location and navigation for users. The SDK will connect with the CMX Mobile App Server to determine a user’s location, downloading maps, venues, point of interests, and determine routes for a selected point of interest. The CMX Mobile Application SDK can also receive a mobile push notification when application is not running. When notified, the application can be launched and include message how to join the customer network when first initiated. The core feature is the indoor location which displays current location of device on the map. The location updated as a user moves through a venue and can help navigate the user to some defined location.
The topcoder challenge is to use the CMX Mobile Server SDK to create a new app using a simulated environment for a meeting host to automatically launch a WebEx conference, based on the location of the conference room where the meeting is scheduled.
The SDK is composed of several modules to allow for varying types of application integration. The CMXClient is the core module for getting client and venue information. Read More »
Tags: API, App, Cisco, client, cmx, coder, Conference, core module, develop, developer, device, location, map, mobile, notification, program, programmer, sdk, server, simulator, software, technology, topcoder, venue
Next week in Los Angeles, our team will be at HITEC 2014, the world’s largest hospitality technology show. This year, we are once again sponsoring the wireless network at the Los Angeles Convention Center, so wireless Internet connectivity at the show is free to attendees in the pre-convention areas. Our advanced Wi-Fi technologies and free Wi-Fi access will be offered in the exhibitor space and the Digital Den (conveniently located right outside the Exposition) and common areas of the event center. Every guest in attendance will experience the reliability and convenience of Cisco’s network in real-time.
Visit the Cisco Booth #1126
Today’s guests demand a consistent and personalized mobile experience. They expect to interact seamlessly via their own devices, wherever and whenever they choose. With Cisco Connected Mobile Experiences, you can engage guests with next-generation, location-based mobile services, plus capture the right analytics to drive efficiency and improve service.
Be sure to stop by and visit us at booth #1126 to learn more about our end-to-end Connected Hospitality solutions. Cisco subject matter experts will be ready to meet and discuss specific interests and challenges. Read More »
Tags: Connected, connected mobile experiences, hitec, hitech2014, hospitality, mobile app, wi-fi, wifi, wireless
Wireless is enabling change everywhere. According to Cisco’s VNI Global Forecast, wireless traffic will bypass wired traffic 40% by the year 2017. This is evident by the way many organizations are using Wi-Fi technology. Take healthcare providers as an example: many hospitals today rely on Wi-Fi to provide seamless clinician roaming, improved efficiency and patient care--not to mention patients’ relatives and friends who expect to connect to guest Wi-Fi. And then there is education where we are seeing both universities and K-12 schools faced with more and more students coming onto campus carrying mobile devices with bandwidth intensive applications like video.
The explosion of high performance applications and the number of clients using them is a big reason why 802.11ac adoption is happening at a rapid pace. 802.11ac as a standard addresses the performance needs of applications while providing a robust network that handles a growing number of client devices. Cisco provides our customers with a unique solution to meet the high density requirements with a technology suite called Cisco High Density Experience (HDX). HDX helps Cisco customers prepare beyond 802.11ac and addresses the key aspects of any network that is challenged by the high density of large numbers of clients on the network and increasing performance demands of bandwidth intensive applications. Deploying 802.11ac with Cisco’s HDX Technology will provide a relief from the bandwidth demands while also making the overall Wi-Fi network more efficient.
With this in mind, we are hosting a webinar on June 26th where we focus on 802.11ac Standard, Cisco’s 802.11ac solution including our HDX Technology and how it can be used in various networks. We have also invite Joe Christoffersen who is the Director of IT at Katy Independent School District in Katy, TX to provide his unique perspective on how Katy ISD is deploying 802.11ac, how it will affect the performance of his network and the benefits he expects from this technology.
The webinar is next Wednesday at 1:00PM PDT. Here is the registration link. If you miss it, we will have it available on demand here shortly after.
For more on Cisco’s 802.11ac, visit www.cisco.com/go/80211ac.
Tags: 11ac, 802.11ac, application, client, density, device, experience, HD, HDX, high, high density, network, performance, Speed, technology, wi-fi, wifi, wireless, wlan