Comments on: Get your Wi-Fi network ready for Windows 8 http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/ Sat, 25 May 2013 03:27:45 +0000 hourly 1 By: Leo Laohoo http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/#comment-694576 Leo Laohoo Sun, 11 Nov 2012 00:10:27 +0000 http://blogs.cisco.com/?p=86510#comment-694576 Hi Jeevan,

Thanks for the explanation. Very useful information to look out for. :)

   0 likes

]]> By: Dr. Jose A. Wong - Perez http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/#comment-685139 Dr. Jose A. Wong - Perez Wed, 24 Oct 2012 14:17:23 +0000 http://blogs.cisco.com/?p=86510#comment-685139 …Very informative, from my Cisco Networking Classes, this post enhances my presentations, thanks Mr. Jeevan for sharing it. Regards from PR.

   1 like

]]> By: Jeevan Patil http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/#comment-682223 Jeevan Patil Fri, 19 Oct 2012 16:41:42 +0000 http://blogs.cisco.com/?p=86510#comment-682223 Hi Steven,
If you have a Windows 8 client driver configured with WPA2 and any Cisco lightweight release other than these three you will not be able to connect.
Windows 8 does not support MFP(it supports 11w only) and so the question of whether client MFP is turned on or off is not applicable.
Best Regards,
Jeevan

   1 like

]]> By: Steven http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/#comment-682202 Steven Fri, 19 Oct 2012 15:28:14 +0000 http://blogs.cisco.com/?p=86510#comment-682202 So if we have Infrastructure MFP enabled, but client MFP is optional will we be affected by this?

   0 likes

]]> By: Jeevan Patil http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/#comment-679224 Jeevan Patil Fri, 12 Oct 2012 14:47:28 +0000 http://blogs.cisco.com/?p=86510#comment-679224 Yes Ronald. Specifically this issue applies to lightweight APs managed by a WLC. The solutions as listed in the blog are available now for you to try.

   0 likes

]]> By: Ronald Mundy http://blogs.cisco.com/wireless/get-your-wi-fi-network-ready-for-windows-8/#comment-679206 Ronald Mundy Fri, 12 Oct 2012 14:05:46 +0000 http://blogs.cisco.com/?p=86510#comment-679206 Does this include lightweight APs running through a WLC?

   0 likes

]]>