Cisco Blogs


Cisco Blog > Mobility

Cisco will ride the 802.11ac Wave2

If you recall, back in the early days of 802.11n, the Wi-Fi Alliance (WFA) rolled out the 802.11n certification program in phases.  Here we are several years later and in that same fashion, the WFA has split the IEEE 802.11ac specification into two certification phases: Wave 1 and Wave 2.

Last week we announced the availability of our 802.11ac Wave 1 Module for the 3600 Access Point and along with that, our intention to develop an 802.11ac adaptive radio module that will support the second phase of 802.11ac, or Wave 2. Most of the 802.11ac discussion in the last year has been focused on Wave 1, so we want to kick off the conversation about the second phase, Wave 2.

80211ac1
If Wave 1 promises increased wireless performance to address the increasing demand for higher performance including growing number of clients demanding higher performance for applications such as HD video streaming, then Wave 2 will stun you with its ability to provide even more throughput beyond the 1.3Gbps that Wave 1 provides as well as a number of other features that will further improve wireless connectivity. It is like taking a really good rock song and adding more cowbell to it.

SNL jokes aside, with the additional features packaged in Wave 2 comes the opportunity for further innovation in Cisco’s Wireless portfolio. We feel that it is important to stay ahead of the technology curve so that customers can plan and benefit from these advances sooner rather than later. So let’s discuss what features are coming with 802.11ac Wave 2. Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , ,

Cisco Brings Gigabit Wireless to Life with the AP3600 + 802.11ac Module: Demo Highlights

The question isn’t IF your users will need more bandwidth, but WHEN they will need more bandwidth. 802.11ac represents the next evolution of the 802.11 standard, and, as you’ve heard, this one really pegs the gas petal in the quest for speed. Offering a link-rate of up to 1.3Gbps, 802.11ac represents the first wireless standard that surpasses the gigabit barrier.

But what makes 802.11ac unique isn’t just bandwidth. The new standard represents a forced push to the cleaner 5GHz spectrum, as well as extended battery life, made possible by getting devices on and off the air more quickly. To learn more about the technical details under the hood of 802.11ac reference this whitepaper.

Cisco’s Aironet Access Point 3600 and an alpha version of the 802.11ac module were demonstrated during Cisco’s presentation during Wireless Field Day 3 (the demo occurs at timestamp 15:30 in the video). Keep in mind that this is a demonstration of a pre-released product so it is expected that throughput and functionality will change and likely increase when the product is available for customers in early 2013.

The test goal was to measure one client, one Access Point 802.11ac performance and leveraged Ixia’s IxChariot to generate UDP traffic over the air. The test was done in an open real world environment, so the achieved throughput is less than what would be expected in a clean RF environment typical of a benchmark test.

Read More »

Tags: , , , , , , , , , , , , , , , ,