Consider this. According to the second chapter of the 2011 Cisco Connected World Technology Report, one in three college students and young employees under the age of 30 would prioritize device flexibility and social media freedom over salary in accepting a job offer. In fact, 40 percent of college students and 45 percent of young employees said they would accept a lower-paying job that had more device flexibility and social media access, than a higher-paying job with less flexibility. Wow!
People are so in love and attached to their mobile devices that half of college students and young employees said they would rather lose their wallet or purse than their mobile device, according to the study. And their mobile devices are multiplying – 77 percent of employees have multiple devices and one in three employees globally uses at least three devices for work.
Their attachment to their mobile devices goes a step further. More than half of college students and young employees want to use their own devices to access corporate networks, and two in five consider it a critical function of their job to be able to connect to the network from any location at any time.
So, what does this mean for businesses? People will want to continue their love affair with their mobile devices at work, so it’s better to be prepared to support employee-owned devices as the “bring your own device” trend is only becoming more prevalent.
We often talk about business issues, customer care-abouts, productivity savings and the like on this channel, and sometimes philanthropy or esoterics, but mostly if you’re an engineer you have to deal with the technology, the installation, the support, and all the other stuff in terms of where the-rubber-hits-the-road.
When we post videos, we know people lose interest if they’re more than five minutes, so I’m glad it takes less than that to connect the gear up. A couple of cheats help of course -- like switching the radios on in the Cisco gear (they are shipped switched off for security reasons), and it helps to have a pre-charged battery available for the Intermec CK3. But then the video wouldn’t have made it onto the channel! We have quite a few customers with this kind of Warehouse technology.
John Deere, working with integration and technology partners Prime Technologies (now Kubica) and AeroScout, used the existing Cisco Wi-Fi networking nodes that it had already installed throughout the facility to avoid the expense of installing RFID readers for a new manufacturing solution.
John Deere MaxEmergeXP
Here’s the story: John Deere’s Seeding Group factory in Moline, Ill. was seeking an automated solution to improve on its manual work in process manufacturing system. It wanted to increase efficiency in the way it replenished welding material as well as improve the way it carried out processes at its assembly stations at the plant. The factory in question assembles John Deere’s row-crop planter machines -- the MaxEmerge XP range - that are used by farmers to deposit a variety of seed in soils and seedbeds.
The new system uses a wireless back-haul to a Cisco infrastructure that enables the SAP, reporting and programmable logic controller (PLC) systems to communicate live. It’s intended to improve material replenishment and reduce delays caused by waiting for materials in its welding areas. It allows the equipment manufacturer’s kitting staff to boost material replenishment speed, and allows assembly workers to prepare for specific equipment as it approaches their assembly stations. The RFID Journal Story goes into excellent detail on the wip process and the process improvement, but I did want to reiterate some of the key business metrics:
“Our goal was to improve Takt time *,” says Shay O’Neal, John Deere Seeding Group’s project manager, who expects the reduction to increase from what he estimates may be about 5 percent improvement in Takt time thus far. He reckons there has been a 40 percent reduction in cycle time because of the improvement in replenishment. He has also seen a decrease in overtime work undertaken by kitting staff at the welding station. “I was pleasantly surprised to see how well the system met our needs,” O’Neal said in the RFID Journal article.
John Deere has seen a 40 percent increase in efficiency in welding due to improvements in material replenishment and fewer delays caused by waiting for materials in its welding areas.
On the assembly line, the system provides a view into the work in process (WIP), which thus far has reduced the cycle time (Takt) it takes to assemble a single product by about 5 percent.
Since existing Cisco Wi-Fi nodes read the RFID tag of each seeder as it passes from one assembly station to another, indicating where it has been and what its next assembly location will be, John Deere avoided the expense of installing RFID readers.
For quite a few years, experts within the wireless communications industry have been expressing concern about the potential for running out of wireless network capacity. Moreover, FCC Chairman Julius Genachowski noted the ongoing challenges in his 2009 address at CTIA.
In July, the Fortune article, Spectrum Squeeze: The Battle for Bandwidth, envisioned a potential fight for wireless bandwidth frequencies between television networks and telecom service providers. In Canada, earlier in September, Shaw Communications announced it would use Wi-Fi as its next-generation wireless network of choice — in anticipation of future customer demand.
We all see a growing trend of using wireless technologies in hospitals due to its benefits in cutting healthcare costs and increasing accessibility for patients and healthcare providers. Wireless applications have the potential to improve care by providing real-time access to a patient’s medical history including treatments, medications, laboratory tests, insurance information and more.
Our customer, Children’s Mercy Hospitals and Clinics – one of the leading children’s hospitals in the U.S.—works tirelessly to help ensure healthcare providers, administrators, and patients have access to leading technologies. So when it came to managing the hospitals’ wireless network, IT managers knew they needed a best-in-class solution. Deploying the right wireless technologies is not only a matter of adopting reliable solutions – it’s also about putting the systems in place to identify and mitigate wireless interference, which can be a major challenge at a busy hospital.
To combat this, the hospital deployed the Cisco Aironet 3500 Series access points throughout the campus to enable high-performance 802.11n wireless services and Cisco CleanAir technology to both troubleshoot problem areas and optimize the wireless environment. The IT team quickly identified and addressed many areas of interference, including pinpointing that some interference was coming from public buses changing traffic lights at a nearby bus stop. With the powerful Cisco environment, Children’s Mercy Hospitals is moving to a “self-healing” wireless network that will automatically fix itself when interference is encountered.
Listen to what the customer has to say about their deployment and Cisco CleanAir: Watch now. You can also read and download the PDF version.