Tomorrow’s a special #WirelessWednesday, hats off to the folks working hard at Tech Field Day for kicking off the SEVENTH installment of Wireless Field Day. It’s an exciting time for the industry to give the delegates and the world wide web of Wi-Fi enthusiasts a glimpse behind the scenes of some of the latest technologies, and we are ready to put on a show.
This year, Cisco will host Wireless Field Day 7 delegates at the Cisco Meraki San Francisco office this Friday.
We will be spending 2 hours discussing the forefront of Wireless technology with Cisco thought leaders. Here is a sneak peek of what will be covered.
- Latest updates on the Cisco Meraki MR product line.
- Deep dive into the Cisco Meraki traffic analytics algorithm; how it works and how it scales for large deployments.
- Deep dives into MU-MIMO and RX-SOP; what they are and how they work
- Discussion on 802.11ac and where it’s going.
The show will start at 9:30am PST. We’ll be on Twitter with #WFD7 and streamed live on the TechFieldDay website. Tune in Friday to hear updates on the future of wireless networking.
Tags: #80211ac, #WFD7, #wirelesswednesday, airtight, aruba, avaya, Cisco, Extreme, Fluke, Industry, meraki, network, networking, tech field day, techfieldday, technology, wi-fi, wifi, wild packets, wildpackets, wireless
By now you’ve probably heard quite a bit about the newest generation of Wi-Fi, 802.11ac. I’ll save you the gory details, just know it’s about 3x faster than 802.11n and will help to improve the capacity of your network. Jameson Blandford and I were recently guests on the No Strings Attached Show podcast with Blake Krone and Samuel Clements (Click to listen to the podcast).
I wanted to follow up the podcast with a blog to go over considerations for deploying, testing, and tuning 802.11ac.
Considerations for deploying 802.11ac
The first question you’ll want to ask yourself, is, if your switching infrastructure can handle 11ac? The answer probably is, yes. The things to consider are the port speed and power-over-Ethernet (PoE) capabilities. You’ll want the access point to have a gigabit uplink to the switch. Each 11ac access point could potentially dump several hundred megabits per second of traffic onto your wired network. It’s also not a bad idea to have 10 Gig uplinks on your access switches to distribution or your core. If you have even just a couple access points on a single access switch, you may quickly find yourself wishing you had 10 Gig uplinks.
Next you’ll need to consider how you will power the access points. If you are like the majority of our customers, you will use PoE from your switches. While 11ac access points require 802.3at (PoE+) for full functionality, the Aironet 3700 will run happily on standard 802.3af PoE. In fact, it remains 3 spatial-streams on both radios, so performance does not suffer because you have a PoE infrastructure.
Will you deploy 80 MHz channels? Read More »
Tags: 11ac, 11n, 802.11, 802.11ac, 802.11n, access point, Aironet, chanalyzer, cleanair, deploying, Enterprise, gigabit, infrastructure, macbook, metageek, mobility, network, network engineer, networking, omnipeek, performance test, performance testing, podcast, PoE+, Prime Infrastructure, spatial stream, Testing, tuning, wi-fi, wifi, wild packets, wireless, wireshark