February is here. Winter is in full swing on this side of the equator. Summer is grasping the other. I know it’s been a warm one so far for our friends in Australia. But snowfall amounts in the Northeast has our ski areas in Northern California and the Rockies so envious. Such is Mother Nature right?
Recently, our team announced some important details for our Switching and Wireless products.
I thought I would take the time to let you all know more on these announcements.
First up, Nasser Tarazi, Wireless Product Manager, announced two new models. We will cover the new WAP351 this week and the new WAP131 next week.
The New Cisco WAP351
The new Cisco WAP351 perfect for conference rooms, classrooms, hospitality and other flexible deployments. It offers Dual Radio (2.4Ghz and 5Ghz) wireless N connectivity, a 5-port Switch with PoE PD and PSE support, Single Point Setup, Captive Portal and comes with Limited Lifetime Warranty.
The WAP351 offers something new to the Wireless portfolio. Here is a quick Power Over Ethernet (PoE) primer. PoE Powered-Device (PD) is the ability to power the device through an PD-capable Ethernet port. PoE PSE (Power Sourcing Equipment) is the ability to supply power a device connected to a PSE-capable Ethernet port. In terms of power, a standard PoE port can support a maximum output of 15W, while a PoE+ port supports up to 30W.
Now, back to the WAP351. As mentioned above, the WAP351 support both PD and PSE. This means if the WAP351 is connected to a PoE+ switch like the SG300-10PP, the WAP351 can be power through PD-capable Ethernet port, while at the same time powering a standard PoE device like a phone or another AP, like the WAP131 through the WAP351’s designated PSE-capable Ethernet port.
More on Wireless Access Points and PoE:
- PoE: Power over Ethernet. PoE enables Power and Data to be combined onto a single Ethernet cable to power devices such as access points, IP phones, or IP cameras
- PSE on a WAP is exclusive to the new WAP351
- A WAP with PSE is attractive for verticals such as education, hospitality, and smaller offices and meeting rooms where both wired and wired access is required
- PoE enables WAP’s or other endpoint devices to be installed where power typically is not available, such as on a wall or ceiling. This allows for greater flexibility during deployments.
- All Cisco Small Business WAP’s support PoE PD
- Dual-Radio WAPs requiring 802.3af PoE power = WAP131, WAP351, WAP561
- Dual-Radio WAPs requiring 802.3at PoE+ power = WAP371, WAP351 when using the PSE with full power budget
- The WAP351 can be powered by 48V/1.25A external DC power if a 802.3af/t PoE switch is not used or available
- The WAP351 can provide 6w of PSE when using 802.3af
Ok you got it? Make sense?
Cisco 300 Series Switches
In other news:
Switching Product Manager Michael Wynh announced several price reductions on the ever-popular 300 Series Switches. This is good news for our customers and channel partners alike. Businesses can maximize their budgets and take advantage of Cisco’s class-leading PoE switching products. For more information on these important updates, please contact your local Cisco Representative or check out our support community.
That is it for now. Thanks for hanging out with us.
Until next time,
Tags: #wireless, access point, Cisco, Cisco Wireless, ethernet, network, PoE ports, port, router, switch, VLAN, wlan
I hope everyone’s week has been a fruitful one.
Alike many product teams, ours sometimes have a tendency sometimes to keep a large amount of focus churning out new products with all of the features and performance characteristics our customers want in quality networking products.
While one of our product traits is #useability, we all know, there are features that are perhaps not as straightforward to the layman, small business owners, even though these savvy folks understand the need to use these features for their businesses to be successful.
So in that spirit, we have assembled a team of young, bright individuals and challenged them with an aggressive list of topics. The first of these topics is an informative yet light video-on-demand on Quick VPN configuration tips for some of my RV Series router models. Configuring VPN’s, even though it sounds exciting (yes that is a joke), is not always straightforward, so this video should be very helpful for many.
I would like to introduce you to Ruben:
I also wanted to pass along two Cisco Small Business Links that house a set of VoD’s that are a little more technical in nature that our team in Greenville has produced for topics such as Configuring VLAN’s on the RV320 and RV325 and setting up multiple types of VPN’s on RV130, RV320, RV325 and others. These again are little more technical in nature, but very informative and helpful in getting your Small Business Networking configured as needed.
Here is the Cisco Small Business YouTube Page.
And here is the Cisco Small Business Vimeo Page.
Make it a great day.
Tags: growth, network, router, Scalability, small business, switch, VLAN, vpn, wireless
Nuclear security is a high priority international threat today. The Nuclear Security Summit (NSS) 2014 took place in The Hague, the Netherlands, following the summits in Washington D.C (2010) and Seoul (2012).
An event of this magnitude required nothing but the best network solution. The venue had existing small networks across 5 buildings and 4 tents. They decided to disable the existing networks and setup a comprehensive Cisco network solution exclusively for this event. The major requirements were: Read More »
Tags: midmarket, network management, NSS, security, unified access, VLAN, wi-fi, wifi, wireless
If you are a professional photographer or even an amateur like me, you want to have ready access to various control dials on your camera to capture the moment perfectly. Professional cameras provide high level of control to get the best outcome. But there are times when you want to put the camera and the lens in Auto mode or wish that the camera could automate some decisions that make your workflow easier.
Likewise, Cisco Wireless LAN products provides the level of quality, functionality and control that is unmatched and hands-down the best enterprise wireless networking portfolio in the industry. But there are scenarios where it is preferable to expedite wireless configuration with best practices automatically enabled and easy access to data to simplify monitoring and troubleshooting workflow. For example, a small business owner manages his own network or in a K-12 a librarian acting like a part-time IT administrator. This not only provides operational efficiencies for the IT organization but also improves end-user and partner experience.
Cisco WLAN Express Setup is an attempt in this direction. It is now available on 2500 Series Controller (CT2504) starting with software release 184.108.40.206.
It includes three components
- Easy-to-use setup wizard: This eliminates the need for console cable and command line setup. Instead, 3-step web-wizard is used to quickly boot strap a Controller and configure employee and Guest WLAN out of the box.
Read More »
Tags: 11ac, 802.11ac, access point, aireOS, analytics, App, application, AVC, best-in-class, Bonjour, cellular, chromecast, Cisco, cmx, configuration, connection, control, controller, data, device, Express, LAN, mag on ap, mobile, mobility, network, networking, optimized roaming, policies, protocol, release, rx-sop, setup, software, Speed, technology, traffic, users, visibility, VLAN, vni, wi-fi, wifi, wired, wireless, wlan, WLC
Cisco Wireless Release 8.0 is now available: Product Bulletin
The Cisco VNI Global Mobile Data Traffic Forecast, 2013 – 2018 revealed some stunning trends with growth projections that are sure to have a dramatic impact on wireless networks worldwide.
In 2013, globally, there were nearly 22 million wearable devices generating 1.7 petabytes of monthly traffic. There were about 7 billion mobile-ready devices and connections with mobile network connection speeds that have more than doubled, to 1.4Mbps up from 526 Kbps in 2012.
By 2018, there will be more than 10 billion mobile-ready devices and connections. The average mobile connection speed will nearly double, from 1.4 Mbps in 2013 to 2.5 Mbps and over 4.9 billion devices will be IPv6-capable. There will be more traffic offloaded from cellular networks (on to Wi-Fi) than remain on cellular networks.
Read More »
Tags: 11ac, 802.11ac, access point, aireOS, analytics, App, application, AVC, Bonjour, cellular, chromecast, Cisco, cmx, connection, control, controller, data, device, fastlocate, HDX, IPv6, LAN, lbs, location, mag on ap, mbps, mobile, mobility, multicast, network, networking, optimized roaming, Packet, patterns, pmipv6, policies, Presence, protocol, q-in-q, q-in-q tagging, release, rx-sop, software, Speed, technology, traffic, users, visibility, VLAN, vni, wi-fi, wifi, wired, wireless, wlan, WLC