Contributed by Mark Palazzo, VP/GM for Cisco’s Cable Access Business Unit
On the last day of a New Orleans week that contained two major conventions – the Society of Cable Telecommunications Engineers’ (SCTE) annual Cable Tec-Expo, preceded by the Cable Television Association for Marketing’s (CTAM) Summit – early morning shop talk requires a strong cup of coffee.
That’s what prompted this impromptu chat between me and Leslie Ellis, Multichannel News columnist and winner of the 2010 SCTE/WICT Women in Technology award.
Read More »
Tags: cable, cmts, ctam summit, docsis 3.0, ebif, ip video, leslie ellis, scte expo, Service Provider, video over docsis
People often ask how many 6 MHz channels it takes to do an IP video offering over cable. The answer, of course, is “it depends,” but let’s be more specific: MSOs can create an IP video offering with as few as four 6 MHz channels. With eight, they can create a partial replacement of the traditional linear and on-demand video product line. Sixteen 6 MHz channels afford a full replacement of what’s on the MPEG plant today.
If that sounds like a lot, think about it another way. Today’s 860 MHz cable plant contains about 125 channels, including analog and digital. Between two and four channels are currently used to handle both broadband and voice over IP (VoIP) traffic. Viewed through that prism, 16 channels perhaps don’t seem like so much!
How much bandwidth is really needed to deliver VoIP depends on the nature of the service offering. Offering a full simulcast of the linear lineup costs more in bandwidth – some networks are already carried in dedicated analog, standard definition, and high definition bandwidth. By contrast, offering VoD content in IP is a variation on switched digital video, itself a bandwidth saving mechanism.
John Chapman, Cisco Fellow and CTO of Cisco’s Access, Transport and Technology group,
talks candidly in this short video about what it takes, in bandwidth and QoS, to launch a video over IP service.
Read More »
Tags: cable, docsis 3.0, ip video, john chapman, Service Provider, vdoc, video over docsis
Contributed by John Mattson, Director of Product Management, Cable Marketing
New 3G60 Broadband Processing Engine Enables Cable Operators to Cost-Effectively Move to All-IP Networks
The long-awaited 3G60 line card for the uBR10012 CMTS has finally arrived. Ever since Cisco first conceived this line card, many worldwide cable providers have been waiting for its debut with breathless anticipation. In my 22 years in the cable industry I can’t recall any other product with as much advance customer interest as this one.
Why is the 3G60 such a hot commodity? Because it finally brings the right combination of very high capacity and very low cost-per-port that enables operators to realistically deploy Video-over-DOCSIS (VDOC) service. And VDOC is the key to moving to a converged, all-IP network, which dramatically reduces both capital and operating costs and provides unprecedented flexibility to introduce new services quickly and efficiently.
The 3G60 provides up to 72 downstream ports and 60 upstream ports on a single line card, – over 3 times the density of any line card on the market today. Using the 3G60, a single uBR10012 can support up to 576 downstream and 480 upstream ports per chassis. In addition, starting from a minimal base system, all of the upstream and downstream ports on the 3G60 can be provisioned via software licensing, so customers can install the card and then only pay for the ports they use. The 3G60 supports DOCSIS® 3.0 downstream channel bonding of as few as 2 up to as many as 24 channels, which makes downstream speeds of over 900 megabits per second possible. Read More »
Tags: 3G60, cable, cmts, docsis 3.0, ip video, IPTV, Service Provider, uBR10012, vdoc, video over docsis
The third wave of video is off-the-hook at this week’s SCTE Cable-Tec Expo in New Orleans. Brief refresher: Wave 1 was linear TV, both analog and digital. Wave 2 was a shift of video onto switched IP networks. Wave 3 is the chapter unfolding right before our other IP-connectible screens – tablets, laptops, PCs, smartphones – that are ready to receive and display video. It brings with it a way to launch new services much quicker than in the past.
We’ve been focused on this third wave of video for what seems like forever, but let’s call it four or five years. Ever since we contributed to the third chapter of the DOCSIS cable modem specification. We’re big believers, given our blended heritage as analog and television pioneers, from our Scientific-Atlanta roots, and as Internet pioneers, from our Cisco roots.
We’re also big believers in giving our people credit where credit is due, which is why it is such a honor to be a part of SCTE icon Ron Hranac’s rise to the Hall of Fame this year. Go Ron go! We’re with you all the way, and very grateful that you’re on our team!
Here’s what we’re eager to show you in our booth at the Expo (#553):
- Our plans and technologies to support Video over DOCSIS, which we call “VDOC”
- 3DTV set-tops that will ease the hiccups associated with early-model (pre-HDMI 1.4) 3DTVs
- Our work on “TV Everywhere,” helping your subscribers get all the TV they want, on any of their screens, no matter where they are
- Mobility services, commercial services for small and medium businesses, and the Cisco Interactive Showcase
- Our ongoing and expanding efforts to reduce carbon footprint, in the SCTE Green Pavilion – set-tops, access/transport products, and our Cisco TelePresence videoconferencing efforts
Outside of the booth, you’ll also be able to catch up with our technologists and researchers during the conference. Read More »
Tags: cable, ip video, scte, Service Provider, third wave of video, video over docsis