IDC’s SMB Survey comparing IT spending priorities in 2012 and 2013 concluded that the top three requirements for the network are performance, security and capacity.
How is designing a network different for a giant auctioneer different from other mid-sized enterprises?
Ritchie Bros. Auctioneers is the world’s largest auctioneer of heavy equipment and trucks. They sell billions of dollars of unused and used equipment at hundreds of unreserved public auctions each year. What’s even more impressive is that they are able to do this with only 1300 employees worldwide. Read the full blog here Read More »
If you are a professional photographer or even an amateur like me, you want to have ready access to various control dials on your camera to capture the moment perfectly. Professional cameras provide high level of control to get the best outcome. But there are times when you want to put the camera and the lens in Auto mode or wish that the camera could automate some decisions that make your workflow easier.
Likewise, Cisco Wireless LAN products provides the level of quality, functionality and control that is unmatched and hands-down the best enterprise wireless networking portfolio in the industry. But there are scenarios where it is preferable to expedite wireless configuration with best practices automatically enabled and easy access to data to simplify monitoring and troubleshooting workflow. For example, a small business owner manages his own network or in a K-12 a librarian acting like a part-time IT administrator. This not only provides operational efficiencies for the IT organization but also improves end-user and partner experience.
Cisco WLAN Express Setup is an attempt in this direction. It is now available on 2500 Series Controller (CT2504) starting with software release 22.214.171.124.
It includes three components
Easy-to-use setup wizard: This eliminates the need for console cable and command line setup. Instead, 3-step web-wizard is used to quickly boot strap a Controller and configure employee and Guest WLAN out of the box. Read More »
In 2013, globally, there were nearly 22 million wearable devices generating 1.7 petabytes of monthly traffic. There were about 7 billion mobile-ready devices and connections with mobile network connection speeds that have more than doubled, to 1.4Mbps up from 526 Kbps in 2012.
By 2018, there will be more than 10 billion mobile-ready devices and connections. The average mobile connection speed will nearly double, from 1.4 Mbps in 2013 to 2.5 Mbps and over 4.9 billion devices will be IPv6-capable. There will be more traffic offloaded from cellular networks (on to Wi-Fi) than remain on cellular networks.
In my last blog I discussed setting the stage in preparation for the Wi-Fi network for Mobile World Congress 2014 which supported more than 80k devices over a span of 4 days. Today I’ll talk about one of the many site surveys we conducted at the Fira Gran Via to ensure the success of our high density network. Full details in the white paper here.
High Density Wi-Fi deployments and site surveys go hand in hand. Pre-installation and post-installation site surveys account for the most effective way to identify the contours of your RF coverage and eliminate potential multipath distortions, hidden nodes, and other coverage issues. Special attention was given to the large keynote auditorium halls in order to keep a check on the additional RF coverage needs to accommodate the high density of users packed in a very close range.
View of inside the Hall-4 Keynote Auditorium (23000 sq ft) before the Facebook keynote session
Site Survey analysis used to measure the RF coverage in Hall-4 keynote auditorium
The Hall-4 auditorium was one example of such a high density area with the 2000 person capacity area had a peak connection of 1924 concurrently connected Wi-Fi devices distributed across 16 Cisco APs while the Facebook keynote was in progress, with a max load of 530 Mbps of internet traffic. To avoid an RF overlap, the ceiling mounted APs above the auditoriums were converted to monitor mode. Using the final pre-keynote site survey data, the RF profile for the Hall-4 auditorium was tweaked, and RRM automatically optimized the coverage to the desired degree by adjusting the Tx power levels. Read More »
If you’re headed to Interop Las Vegas, there are a few things you won’t want to miss. Much like the Keynote (video above) we have a lot of fun and useful things planned
When you walk into the exhibition hall, you’ll see Cisco’s booth (1327)*, front and center. This is our home-base and where a lot of activity will happen. Stop by to check out live demos, to get your questions answered, to hear our technology experts give quick theater presentations, and to check out our NOC. If you use Cisco gear (and I’ll assume that you do if you’re reading this blog) you’ll want to stop by to get the latest updates.
We’re trying something new – we’ll have a working NOC in our booth. Read More »