In my last blog I discussed setting the stage in preparation for the Wi-Fi network for Mobile World Congress 2014 which supported more than 80k devices over a span of 4 days. Today I’ll talk about one of the many site surveys we conducted at the Fira Gran Via to ensure the success of our high density network. Full details in the white paper here.
High Density Wi-Fi deployments and site surveys go hand in hand. Pre-installation and post-installation site surveys account for the most effective way to identify the contours of your RF coverage and eliminate potential multipath distortions, hidden nodes, and other coverage issues. Special attention was given to the large keynote auditorium halls in order to keep a check on the additional RF coverage needs to accommodate the high density of users packed in a very close range.
The Hall-4 auditorium was one example of such a high density area with the 2000 person capacity area had a peak connection of 1924 concurrently connected Wi-Fi devices distributed across 16 Cisco APs while the Facebook keynote was in progress, with a max load of 530 Mbps of internet traffic. To avoid an RF overlap, the ceiling mounted APs above the auditoriums were converted to monitor mode. Using the final pre-keynote site survey data, the RF profile for the Hall-4 auditorium was tweaked, and RRM automatically optimized the coverage to the desired degree by adjusting the Tx power levels. Read More »
Tags: access point, AP, application, barcelona, beamforming, Cisco, client, coverage, data transfer, deployment, device, Dual Band, event, experience, fira gran via, GHz, HD, HDX, hidden node, high density, hotspot2.0, infrastructure, internet, keynote, mobile world congress, multipath distortion, mwc, network, network operations, radio resource managmeent, rf, RRM, rx-sop, site survey, TB, traffic, traffic pattern, user density, users, wi-fi, wifi, wireless, wireless data transfer