This week we finished our biggest product announcement in recent memory.The various teams worked hard to bring out to our partners and customers products that delivered maximum quality, flexibility and value.
One of the products included was the new Cisco Small Business WAP371 Wireless Access Point. This Access Point is the first 802.11ac model in the portfolio representing a paradigm shift in the way you as a business owner can improve wireless performance for your business. This new model has a dual radio, includes a Gigabit Ethernet (GbE) Power-Over-Ethernet (PoE) LAN port and has the ever-popular Single Point Set-up capability. The WAP371 also features Captive Portal for guests, and like the rest of the wireless portfolio, offers simple set-up and deployment with an intuitive user interface and set-up wizards.
But this release raises the question regarding exactly why you should think about upgrading your small business wireless network.
Nasser Tarazi, Product Manager for the Cisco Small Business Wireless Access Points, talks about reasons why to take a look at the all-new WAP371.
“Right now is a good time for Small Businesses to consider upgrading their wireless networks from older 802.11 technologies to 802.11ac. First-off, 802.11ac is three times faster than it’s predecessor, 802.11n. The use of Multiple-Antenna, Multiple-in, Multiple-out technology (MIMO) reliably delivers this boost in performance providing for a much better user experience.”
Nasser goes on, “We expect over 70% of mobile devices will be 11ac-enabled by 2016. Like mentioned before, 11ac is three times faster than 11n, so from business-critical to social media applications, improved wireless high-speed performance will ensure your applications will run smoothly, reliably. Also, range is better, even for 11n enabled devices.”
“Security is on every business owner’s mind. 802.11ac is more secure than 11n. And in fact, 11ac is also more power efficient, which can result in a 30% improvement in battery life for your wireless devices such as mobile phones and tablets. Finally, 11ac provides for greatly improved client density, so high-client use cases such as schools, churches, and other organizations will greatly benefit from the upgrade to 11ac.”
Check out our FAQ and the WAP371 product page for more information.
Thanks for your time!
Marc and Nasser
Tags: 11ac, 11n, access, business, Cisco, flexible, LAN, mimo, network, performance, point, QoS, quality, router, single point set-up, small, spatial stream, switch, WAP, wireless, wlan
It is Friday the 13th and we have a full moon, perfect time to provide a quick update from the Cisco SMB Team.
First off, we have posted a Teaser Announcement providing a quick view of some new products that are coming out later this month. The entire Cisco SMB Team has been working hard on this new launch so look for more information that will be coming out.
220 Smart Plus Series
The Switching Team currently has a cisco.com for the new 220 Smart Plus Series.
Ivor Diedricks posted a new Blog earlier this month called Understanding the different types of Ethernet Switches. He explains the differences between fixed and modular switches, and goes into the details of what makes an Unmanaged, Smart and Fully Managed models. It is a good read, if you haven’t already, please take a look.
Finally, I have a new RV325 emulator on our Cisco Emulator Page. These emulators provide you the chance to take a test drive through our device user interface. You can take a look at our easy-to-use configuration wizards, configure features such as VLAN’s, Single-Point-Setup on our Wireless Access Points, and even configure VPN’s on the routers.
Make it a safe Friday the 13th!
Tags: blog, business, emulator, ethernet, Flexibility, Manage, network, PoE ports, PoE+, rout, scalable, small, spatial stream, switch, VLAN, vpn, wireless
By now you’ve probably heard quite a bit about the newest generation of Wi-Fi, 802.11ac. I’ll save you the gory details, just know it’s about 3x faster than 802.11n and will help to improve the capacity of your network. Jameson Blandford and I were recently guests on the No Strings Attached Show podcast with Blake Krone and Samuel Clements (Click to listen to the podcast).
I wanted to follow up the podcast with a blog to go over considerations for deploying, testing, and tuning 802.11ac.
Considerations for deploying 802.11ac
The first question you’ll want to ask yourself, is, if your switching infrastructure can handle 11ac? The answer probably is, yes. The things to consider are the port speed and power-over-Ethernet (PoE) capabilities. You’ll want the access point to have a gigabit uplink to the switch. Each 11ac access point could potentially dump several hundred megabits per second of traffic onto your wired network. It’s also not a bad idea to have 10 Gig uplinks on your access switches to distribution or your core. If you have even just a couple access points on a single access switch, you may quickly find yourself wishing you had 10 Gig uplinks.
Next you’ll need to consider how you will power the access points. If you are like the majority of our customers, you will use PoE from your switches. While 11ac access points require 802.3at (PoE+) for full functionality, the Aironet 3700 will run happily on standard 802.3af PoE. In fact, it remains 3 spatial-streams on both radios, so performance does not suffer because you have a PoE infrastructure.
Will you deploy 80 MHz channels? Read More »
Tags: 11ac, 11n, 802.11, 802.11ac, 802.11n, access point, Aironet, chanalyzer, cleanair, deploying, Enterprise, gigabit, infrastructure, macbook, metageek, mobility, network, network engineer, networking, omnipeek, performance test, performance testing, podcast, PoE+, Prime Infrastructure, spatial stream, Testing, tuning, wi-fi, wifi, wild packets, wireless, wireshark