If you are a professional photographer or even an amateur like me, you want to have ready access to various control dials on your camera to capture the moment perfectly. Professional cameras provide high level of control to get the best outcome. But there are times when you want to put the camera and the lens in Auto mode or wish that the camera could automate some decisions that make your workflow easier.
Likewise, Cisco Wireless LAN products provides the level of quality, functionality and control that is unmatched and hands-down the best enterprise wireless networking portfolio in the industry. But there are scenarios where it is preferable to expedite wireless configuration with best practices automatically enabled and easy access to data to simplify monitoring and troubleshooting workflow. For example, a small business owner manages his own network or in a K-12 a librarian acting like a part-time IT administrator. This not only provides operational efficiencies for the IT organization but also improves end-user and partner experience.
Cisco WLAN Express Setup is an attempt in this direction. It is now available on 2500 Series Controller (CT2504) starting with software release 22.214.171.124.
It includes three components
- Easy-to-use setup wizard: This eliminates the need for console cable and command line setup. Instead, 3-step web-wizard is used to quickly boot strap a Controller and configure employee and Guest WLAN out of the box.
Read More »
Tags: 11ac, 802.11ac, access point, aireOS, analytics, App, application, AVC, best-in-class, Bonjour, cellular, chromecast, Cisco, cmx, configuration, connection, control, controller, data, device, Express, LAN, mag on ap, mobile, mobility, network, networking, optimized roaming, policies, protocol, release, rx-sop, setup, software, Speed, technology, traffic, users, visibility, VLAN, vni, wi-fi, wifi, wired, wireless, wlan, WLC
There’s been some speculation about the performance of the AP2700--just how good could our latest AP fly under stress? We were talking with Blake Krone and Sam Clements from the No Strings Attached Show, where they produce independent discussion and commentary on a variety of wireless equipment and technology across vendors. The idea came up that they could do an independent performance test on the Cisco Aironet AP2700. The guys received no compensation for the testing with the exception of arranging their travel out to Richfield, OH facility for the testing. We also provided 2 AP’s per person just in case they wanted to do some further testing.
Sam & Blake along with several Cisco TMEs loaded up an AP2700 with 100 real clients to see what happens. The testing was meant to be as real world as possible, so they did things like setup the clients at varying distances and angles, use a mix of 11n and 11ac clients, tested with CCO code (7.6MR2), and even factory reset and configured the controller then in front of Blake and Sam to show there’s no funny business. The idea being, if you had 100 clients, and wanted to do the testing yourself and repeat the results, you could. I don’t want to spoil the results, so head to www.nsashow.com/AP2700/ to check out the whitepaper.
Here’s a sneak peek at the client setup:
For full details as well as the results, visit www.nsashow.com/AP2700/
Tags: 11ac, 11n, 7.6MR2, 802.11, access point, angle, AP, CCO, CCO code, Cisco, client, device, distance, factory reset, nsashow, perform, setup, stress, test, white paper, wi-fi, wifi, wireless
Following the last MSE blog on CleanAir, today I wish to explain how we prioritize the Mobility Service Engine’s user experience.
Listening to customers and implementing changes/features based on customer feedback has been a great strength of Cisco products. We from the Mobility Services Engine team strongly believe in this principle and make sure that we reach out to each and every customer who has provided a feedback on Cisco MSE and take their experience with MSE into consideration when designing future features and enhancements.
After analyzing the feedback we received during the MSE 7.4 release, I am pleased to announce that we have decided to implement the following two features as part of series of enhancements that we believe will improve the customer’s user experience with MSE.
Convenient Backup and Restore
Until the 7.4 release, MSE users had limited options in backing up their MSE data. The only supported option was to use the NCS FTP server as the destination for MSE data backups. Due to the limited disk capacity on NCS, as well as sharing of the disk space with other network elements, disk space limitations prevented MSE users from regularly backing up their data. If you are one of those users who always wished you could regularly backup MSE data without running into NCS disk space limitation, or if you wish you could back up your MSE data to non-NCS devices, we have some good news for you.
In the latest MSE 7.5 release, we have added the option to backup and restore your MSE data on remote FTP servers, provided there is connectivity between the MSE and the FTP server. Similar to NCS Backups, MSE data can be backed up to configured repositories (internal or external FTP servers). Love the command shell? We will also be coming up with CLI to backup MSE data. You can now start MSE backup using just a single command.
Read More »
Tags: backup, Cisco, configuration, customer, data, design, device, enhancement, feedback, ftp, location, mse, release, restore, server, setup, technology