I am often asked by customers why UCS has been so successful in such a short amount of time. My response is always the same in that it comes down to two things – 1) Cisco and our partners’ ability to understand and execute against customer needs and 2) A fundamental difference in the underlying architecture.
You may know that Cisco invented UCS service profiles and built the entire system around the notion of hardware state abstraction. Cisco’s approach has been so successful because every element of the system was designed from the beginning to have its configuration set through software, without any licensing requirements. Whether customers are running bare-metal, virtualized, or any combination therein, Cisco UCS service profiles have revolutionized computing and have challenged competitors to try and replicate the simplicity and increased productivity that UCS Manager policies and templates provide. It’s no secret that Cisco UCS Manager has revolutionized the way customers deploy and manage servers, but here are a few things about UCS Manager that you may not be aware of.
Did you know that Cisco UCS Manager is embedded software running within the Fabric Interconnects in a highly available clustered configuration? This is an important distinction from traditional architectures as Cisco UCS Manager is a fully redundant management engine right out of the box the moment the system receives power, without special clustering software or additional licensing fees. Read More »
Tags: blades, Cisco UCS, Cisco UCS Manager, Cisco Unified Fabric, Dell Active System Manager, Dell ASM, HP, HP blade management, HP c-class bladesystem, HP OneView, IBM, IBM Flex System, IBM Flex System Manager, IBM FSM, service profile, UCS Manager
Complexity and Cost Comparison: Cisco UCS vs. IBM Flex System is report recently published by Principled Technologies.
They evaluated both the technologies and costs of each solution and found a UCS solution is both less expensive to deploy and less complex to manage than an IBM Flex System.
Off all the ways Principled Technologies shows how UCS is a superior solution, I wanted to touch on just one: highly available and scalable management. A UCS management domain consists of a pair of Fabric Interconnects and supports up to 160 blade and/or rack servers. In contrast, IBM is limited to 54 blade servers plus a non-redundant Flex System Manager node. Quoting from the paper:
Because IBM Flex System Manager nodes do not failover automatically like the Cisco UCS solution, administrators must manually connect to a backup node and bring it online. Each target system has an OS agent that remains registered to the original FSM node and does not recognize the new FSM. Admins must manually unregister each of these agents from the failed node and then register the new FSM node. [page 7]
Read the full report to learn the many additional ways which UCS is shown to be superior solution and why Cisco has leapt ahead of IBM and is now the #2 blade server vendor worldwide1
Would like to learn more about how Cisco is changing the economics of the datacenter, I would encourage you to review this presentation on SlideShare or my previous series of blog posts, Yes, Cisco UCS servers are that good.
- Source: IDC Worldwide Quarterly Server Tracker, Q1 2013 Revenue Share, May 2013
Tags: 2208XP, 6248UP, 6296UP, B200 M3, blade server, capex, Cisco, CMM, CN4093, Fabric Interconnect, fex, Flex System, FSM, G8264R, IBM, patterns, Principled Technologies, rack server, ROI, service profile, tco, UCS, UCS Manager, x240
Our Technical Marketing Engineers (TMEs) have delivered a library of technical videos, accompanied with voiceover explanations in clear, simple English, to show you how the Unified Computing System really works. Taken as a whole, this library provides a great functional tour of UCS, but it’s broken down into very digestible, well-defined topics so that you can zero in on topics and features of particular interest.
Read More »
Tags: blades, service profile, UCS, unified computing system
A picture really is worth a thousand words. I found this out many times over doing booth duty at IDF and then Oracle Open World recently. We had the UCS Manager Platform Emulator running at IDF, but not at OOW, and being able to actually show people the flexibility, breadth and depth of control you get with the UCS approach to management made a notable difference in the tenor and seriousness of the conversations.
You can download the Platform Emulator from the Cisco Developer Network (CDN) and play with it to get a feel for how UCS Manager is organized. But I wanted to give a nod to the valuable public service provided by Kevin Houston over at BladesMadeSimple: he’s created a YouTube video using the Platform Emulator that walks you through the information and tools available to the administrator(s) in UCS Manager, including the creation of service profiles, templates and pools. It’s definitely long, but thanks to the soundtrack I found myself wanting to samba as I watched (not that I have the slightest idea how to samba; fortunately nobody was around). Simply put, it may well be the coolest 15-minute tech video you’ll see all week.
Read More »
Tags: blade server, service profile, system management, UCS, unified computing, unified computing system