Cisco Blogs


Cisco Blog > Data Center

Cisco UCS – Changing the Economics of the Datacenter

Cisco UCS has fantastic technology that technical decision makers are demanding. But what about business decision makers? It doesn’t matter how great the technology is, the question for BDMs is how will UCS save me money?

I set out to answer that question, connecting UCS technology innovations to TCO improvement, for the Unifying Your Data Center Roadshow (running through late June) and wanted to share the presentation with a larger audience so it has been posted to SlideShare.

Cisco Unified Computing System (UCS): Changing the Economics of the Datacenter from Cisco Data Center

The savings are grouped into two overall buckets: Unified Fabric (servers, networking, cabling, power & cooling) and Unified Management (provisioning, ongoing administration, and systems management software). Each sub-section discuss Cisco’s differentiation at a high level and shows how they impact the value of a UCS solution. The savings categories are validated by customer case studies, some of which you may remember from my first series of blog posts, Yes, Cisco Servers are that good. Lastly there are two real world TCO/ROI examples including Loughborough University who are cutting their costs ~50% over five years.

Would you like to learn more about how Cisco UCS can help you? There are more than 250 published datacenter case studies on Cisco.com. Additionally, there is a TCO/ROI tool that will allow you to compare your existing environment to a new UCS Solution. For a more in-depth TCO/ROI analysis, contact your Cisco partner

Tags: , , , , , , ,

First Look – The Cisco NOC Model For Wired and Wireless

IMG_2069

Your NOC Your Way at Interop

Over the last few weeks, we’ve started to unpack some of the focus-group discussions we’ve recently had with hundreds of IT professionals.  The goal of these focus groups was to help as Cisco continues to ensure we’re meeting our customers’ needs.  We’ve discussed some of the top priorities for network managers including, keeping users happy, reducing the dreaded help desk calls, and improving ROI while reducing overall operational costs.

These and other top concerns for IT professionals were paired up with Cisco and partner technologies to show real solutions.  These solutions have been on display at Interop at the Cisco booth in our NOC area and will likewise be at the Borderless Networks booth at CiscoLive Orlando.  Jimmy Ray Purser and Rob Boyd caught up with the architect of this NOC, Marlowe Fenne to get an introduction to the Unified Access solution.

In this video you’ll see quick ways to: Read More »

Tags: , , , , , , ,

Steps To Optimize Your Network – An Introduction

Harness the Power Infographic

Infographic: The Before and After of Using Optimization Services on a Network [Click to see full]

One of my passions in life is sailing, both cruising and racing.  There is nothing quite like the wind in your hair and the sun on your face to paint a perfect day.  The difference between a great day on the water and miserable one comes down to preparation.  Basic maintenance of the vessel, proactively checking the weather, wind, and tides, and understanding how to optimally operate the vessel for the best performance will enhance the experience.  It’s not something that one can fully master, and you will always be learning and striving towards perfection.  This is very true of my other passion, which is helping customers get optimal performance out of their networks.  Once again, success is all about preparation.

Over my career, I have been through more customers than I can count and have seen widely ranging degrees of success amongst these customers.  Why is it that some customers are extremely successful with no outages or performance issues whilst others seem to never be able to keep pace with outages and performance issues are a near daily occurrence?  Some deploy a new technology without a glitch while others dread the thought of adding new technologies to their network in fear of the potential impact to their business.

You need a holistic approach that takes into consideration all of the systems involved in a solution.  You can design and deploy the best voice/video solution but if the underlying network is not designed and configured to support this business service, it will not likely meet the performance requirements of the business. For example, imagine your business has the requirement to deliver a periodic streaming video broadcast from senior management to the employees of the company.  Your company consists of campuses globally along with remote and mobile workers.  So, you need to be able to stream across  your wired, wireless and VPN network to users both local and remote. This is where the role of architecture comes into play.

The importance of architecture is that it pulls together a complete holistic view of the business services and the requirements to effectively support them.  How much bandwidth is required, what is the tolerable round trip delay, tolerance for packet loss are all considerations that will go into building that strong foundation that is required for success.  In today’s world of BYOD, the expectation is that these services will be available and perform flawlessly over wired, wireless and VPN.

I set a goal to increase the speed performance of my sailboat and purchased brand new sails to reach this goal.  After installing the sails, it was clear that I had gained no additional speed.  After doing a bottoms-up assessment of the vessel,  I realized that the hull was covered with barnacles.  Without a clean hull, adding sails will not deliver the desired result.  Trying to deploy a business service, such as a voice or video solution, over a network that is not designed for it will also fail to deliver the desired.  Most problems with deploying advanced technologies lie within the foundational network rather than the advanced technologies themselves. Your network, like the hull of my boat, is the foundation of your business services.  If this is not solid, the chances are the higher level services that rely on this “foundation” will likely not delivery the desired results.  A holistic approach will take into consideration the business services that must run over the network and use this to build out an effective foundation.  Read this success story on how Ecobank deployed collaboration solutions based on a solid infrastructure.  You can also see how optimization has benefited other companies in this infographic.

Stay tuned for my next posts where I’ll cover proven strategies for optimizing your network.






Tags: , ,

Real world ROI results with UCS servers – a detailed study at Loughborough University

I recently worked with Loughborough University on a financial impact study of their initial deployment of Cisco UCS. The study documents their findings of a dramatic improvement in IT efficiency, bearing out the advantages that attracted them to the UCS solution. Loughborough’s Customer Case Study has been revised with the results of this TCO study as well new details on the next stage of their deployment of Cisco Virtual Experience Infrastructure (VXI) Smart Solution.

We examined Loughborough’s projected growth rates and compared the continuation of their previous rack server environment against a UCS solution combined with an expansion of their virtualized environment. Server consolidation and reduced administrator workload contributed to exceptional results: a total savings of US$878,789 (40% OpEx and 60% CapEx) with a 225% ROI and 22% IRR. Compared to the previous environment, Loughborough’s UCS deployment will drive down cost in several key areas over the coming five years:

  • server hardware – 38%
  • switching infrastructure and cabling – 80%
  • power and cooling – 49%
  • new server provisioning – 79%
  • virtualization software – 39%

“When we compared the legacy server and network with one based on Cisco UCS, TCO effectively halves over a five-year investment lifecycle.”

Dr. Phil Richards, Director of IT, Loughborough University.

As a result of Cisco’s Unified Fabric approach, the study shows that Loughborough will need only six switches (three redundant pairs) to support their end state vs. 30 in their legacy environment and a corresponding reduction in cables from 646 to just 44.

These results are typical to what other customers achieve when they switch to UCS. See my first blog post, Yes, Cisco UCS servers are that good.

Would you like to learn more about how Cisco UCS can help you? There are more than 250 published datacenter case studies on Cisco.com. Additionally, there is a TCO/ROI tool that will allow you to compare your existing environment to a new UCS Solution. For a more in-depth TCO/ROI analysis, contact your Cisco partner.

Loughborough University TCO Study Waterfall

Tags: , , , , , , , , , ,

Four Initiatives to Bridge the Collaboration Adoption Gap

In my previous post, I mentioned that I’d briefly describe four initiatives Cisco promotes to help customers bridge the adoption gap. Most of all, adoption needs to be factored in at all phases of the plan-manage-build collaboration investment lifecycle. The biggest mistake organizations can make is to treat adoption as an afterthought or process that naturally occurs without prompting when a collaboration solution goes live.

Bridging the adoption gap begins with lowering the barriers to customer investment in collaboration-focused IT services by expanding the role of “as-a-Service” collaboration consumption models. Here, cloud computing is the enabling technology, but beyond that, Read More »

Tags: , , , , , , , , , ,