Cisco Blogs


Cisco Blog > Mobility

Miercom: Cisco Aironet AP3702i

Cisco’s newest 802.11ac product, the Aironet 3700 Series Access Point is now orderable and shipping in the next few weeks.  The AP 3700 features an integrated 11ac radio with a 4x4 architecture and Cisco’s High-Density Experience (HDX) Technology.  HDX is a suite of features specific to the AP 3700 that delivers the best possible user experience, especially in high client density networks.  HDX is enabled by a combination of  hardware and software features on the AP 3700, features including:

  • CleanAir 80 MHz – Interference detection and mitigation
  • ClientLink 3.0 – RF link quality
  • Smart Roam – Intelligent roaming handoff
  • Turbo Performance – Performance with high client density

Aruba recently launched their 802.11ac access point, the AP-220 series, featuring a 3x3 design.

Miercom recently published a third-party evaluation of the performance between the AP 3702i and the AP-225.  The report consists of a diverse range of test cases meant to gauge real-world performance of the access points.  The tests include; multi-client performance, single client rate vs. range, performance in the presence of interference, and performance on reduced power.  Here are some of the highlights from the report.

Multi-Client Performance

The AP 3700 performed very well in the multi-client performance test, thanks impart to HDX Turbo Performance.  With 60 clients, the AP 3702i had a 6x performance advantage over the AP-225.  The AP-225 struggled to serve all the clients and only mustered 40 Mbps total.  The AP 3702i was able to transmit a healthy 236 Mbps, while maintaining fair throughput to each client.

The test consisted of 60 11ac clients, all associated to the 5 GHz radio.  The clients used were 10 Dell E6430 laptops with Broadcom 4360 three spatial-stream chips, 20 Apple Macbook Air two spatial-stream laptops, and 30 Dell E6430 laptops with Intel 7260 two spatial-stream chips.  Clients were setup in an open office environment surrounding the AP.  Distances varied from 10’ to 50’.

1-Mulit-Client Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Deploying, Testing, and Tuning 802.11ac

By now you’ve probably heard quite a bit about the newest generation of Wi-Fi, 802.11ac.  I’ll save you the gory details, just know it’s about 3x faster than 802.11n and will help to improve the capacity of your network. Jameson Blandford and I were recently guests on the No Strings Attached Show podcast with Blake Krone and Samuel Clements (Click to listen to the podcast).

I wanted to follow up the podcast with a blog to go over considerations for deploying, testing, and tuning 802.11ac.

Considerations for deploying 802.11ac

Switching infrastructure

The first question you’ll want to ask yourself, is, if your switching infrastructure can handle 11ac?  The answer probably is, yes.  The things to consider are the port speed and power-over-Ethernet (PoE) capabilities.  You’ll want the access point to have a gigabit uplink to the switch.  Each 11ac access point could potentially dump several hundred megabits per second of traffic onto your wired network.  It’s also not a bad idea to have 10 Gig uplinks on your access switches to distribution or your core.  If you have even just a couple access points on a single access switch, you may quickly find yourself wishing you had 10 Gig uplinks.

Next you’ll need to consider how you will power the access points.  If you are like the majority of our customers, you will use PoE from your switches.  While 11ac access points require 802.3at (PoE+) for full functionality, the Aironet 3700 will run happily on standard 802.3af PoE.  In fact, it remains 3 spatial-streams on both radios, so performance does not suffer because you have a PoE infrastructure.

Will you deploy 80 MHz channels? Read More »

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,