Cisco Wireless Release 8.0 is now available: Product Bulletin
The Cisco VNI Global Mobile Data Traffic Forecast, 2013 – 2018 revealed some stunning trends with growth projections that are sure to have a dramatic impact on wireless networks worldwide.
In 2013, globally, there were nearly 22 million wearable devices generating 1.7 petabytes of monthly traffic. There were about 7 billion mobile-ready devices and connections with mobile network connection speeds that have more than doubled, to 1.4Mbps up from 526 Kbps in 2012.
By 2018, there will be more than 10 billion mobile-ready devices and connections. The average mobile connection speed will nearly double, from 1.4 Mbps in 2013 to 2.5 Mbps and over 4.9 billion devices will be IPv6-capable. There will be more traffic offloaded from cellular networks (on to Wi-Fi) than remain on cellular networks.
Read More »
Tags: 11ac, 802.11ac, access point, aireOS, analytics, App, application, AVC, Bonjour, cellular, chromecast, Cisco, cmx, connection, control, controller, data, device, fastlocate, HDX, IPv6, LAN, lbs, location, mag on ap, mbps, mobile, mobility, multicast, network, networking, optimized roaming, Packet, patterns, pmipv6, policies, Presence, protocol, q-in-q, q-in-q tagging, release, rx-sop, software, Speed, technology, traffic, users, visibility, VLAN, vni, wi-fi, wifi, wired, wireless, wlan, WLC
It’s that time of year again in the US – Tax Time! That time of year where we review the previous year’s bounty, calculate what’s due, and re-evaluate our strategies to see if we can keep more of what we worked for. Things change; rules, the economy, time to retirement, and before you know it you find yourself working through alternatives and making some new decisions.
Anyway, as I was working through the schedules and rule sheets, my mind wandered and I started to think about Wi-Fi and the taxes associated with it. In my day job, I often play the role of forensic accountant. Like a tax accountant, I’m always looking for a way to get more or understand why there isn’t more already. So along those lines, lets talk about a little known tax that you may well be paying needlessly. I’m talking of course about the dreaded 802.11b Penalty.
Wi-Fi protocols like 802.11b are referenced by standards committees for the workgroup that develops them. In the 2.4 GHz spectrum, there is 802.11b, 802.11g, and 802.11n. Back in 1997, 802.11b was the first modern Wi-Fi protocol ratified by the IEEE and it allowed transmissions of 11 Mbps, a major jump forward from the previous 2 Mbps that was possible with the original 802.11 standard.
After 802.11b came 802.11a, and then 802.11g. Both of these protocols where a radical departure from the simplistic 802.11b structure and employed Orthogonal frequency-division multiplexing (OFDM) modulation (now standard in every 802.11 protocol created since then). OFDM allowed for Read More »
Tags: 802.11, access point, airtime, AP, battery, behavior, channel, client, data, data rate, device, efficiency, efficient, GHz, IEEE, mbps, mobile, mobility, native protocol, network, Packet, portable, protection mechanism, protocol, specification, spectrum, SSID, standard, tax, traffic, utilization, WFA, wi-fi, wifi, wireless
As a Product Manager there is some anxiety but more of an excitement around introducing a platform to the market. Today I am proud to be part of Cisco team that is bringing to market the Cisco Aironet 2700 Series Access Point. What it offers is a tremendous amount of power at a very attractive price point.
We all know Wi-Fi is here to stay and is expanding all around us rapidly. That need for speed is exciting. But what does that mean? Not everyone feels comfortable being on the cutting edge. Many of our customers are not as concerned about chasing the future and have more limited budgets that they hesitate to put down for the best AP knowing there are lower priced options. At the same time, everyone is aware technology moves ahead with or without you, so they don’t want to give up lot of the new capabilities by going totally to the other extreme of not upgrading at all. What they want is something that’s going to last for a while that gives them the advantages available today, but not have to invest a lot to get it. I equate this to buying something like a car. A year ago when I was in the market to buy a new car I didn’t want to sacrifice whole lot of options but if there was one or two options that I could give up in order to save a bit of money, I was okay with that.
This is similar to what Cisco is offering with Aironet 2700 Series. Customers have to choose something that they can utilize in their network that is better than any of the competitive solutions out there, truly built-for-purpose, sleek design on the outside yet tough on the inside and very powerful. Read More »
Tags: 11ac, 11n, 2.4 GHz, 2700, 802.11, 802.11ac, 802.11n, access point, aggregate throughput, AP, application, ASIC, built-for-purpose, chipset, Cisco, client, ClientLink, collision, data rate, GHz, HDX, infrastructure, latency, maximum, mbps, memory, memory contention, network, network processor, offboard, onboard, Packet, packet processing, performance, purpose-built, radio, RAM, rf, scale, silicon, smartphone, tech, technology, throughput, wi-fi, wifi, wireless
As more and more 802.11ac devices come to the market this year, businesses need to make sure the best possible 802.11ac wireless infrastructure gets deployed to make sure those 802.11ac end points are performing at both the best possible data rates and application throughputs to maximize the move to 802.11ac.
Cisco’s Aironet 3700 with HDX Technology does just that. If you’re thinking that the 3700 is just another 802.11ac AP, think again: not all 802.11ac AP’s are created equal.
To demonstrate this, let’s take a Cisco 3700 access point..
When you open a Cisco AP, you will see dedicated memory (RAM) on the radio chipset itself (one on the 2.4 GHz radio, another on the 5 Ghz radio) to ensure the RF packets get processed “onboard” each radio instead of “offboard” in order to reduce latency and any packet processing collision from memory contention on the AP. Additional packet processing can be handled on the “offboard” memory that is part of the network processor portion of the AP platform as well. This unique, innovative ASIC-based Wi-Fi chipset by Cisco exemplifies the built-for-Purpose design, and is the hallmark of Cisco’s 3700 Series AP.
Contrast this with the competitive landscape that claims to be Purpose-Built, but in reality is leveraging off-the-shelf merchant silicon-based 802.11ac WiFi chipsets. Read More »
Tags: 11ac, 11n, 2.4 GHz, 802.11, 802.11ac, 802.11n, access point, aggregate throughput, AP, application, ASIC, built-for-purpose, chipset, Cisco, client, ClientLink, collision, data rate, GHz, HDX, infrastructure, latency, maximum, mbps, memory, memory contention, network, network processor, offboard, onboard, Packet, packet processing, performance, purpose-built, radio, RAM, rf, scale, silicon, smartphone, tech, technology, throughput, wi-fi, wifi, wireless
Cisco has been placing a lot of emphasis on delivering solutions that provide insights and understanding on how customers, patients, visitors and communities interact with their physical environments. Mobility and leveraging mobile devices in the environment has revealed itself as a very powerful way to gather critical business intelligence. This business intelligence is highly impacted by the resolution of the location-data and the demand to improve resolution and accuracy is increasing quickly. Apparently, this has not been missed by UBM. This year Cisco is honored to be selected as a Best of Interop Finalist for the Wireless award category for our innovations in improving location data resolution calculations.
It’s an honor to be recognized for our innovation and technological advancements in wireless, and we wanted to share a bit more about our submission with you.
What are Location Data Resolution Calculations?
Many systems acquire location analytics by relying solely on the probing that occurs from a mobile device to an access point. Unfortunately, this approach is delivering diminishing returns. It puts location analytics at the mercy of the mobile device vendors. What I mean by this is that as mobile device manufacturers look to improve mobile devices in regards to OS, drivers and battery life they are reducing the frequency of the probing from the mobile device. In addition, different mobile device manufacturer use different probing intervals. The need to do this makes sense from the mobile device manufacturer perspective, but it has an impact on the accuracy of the data acquired when representing movement of end users in the physical environment. If a user is recognized when they walk in the environment and then is identified a minute later, there is a lot of movement that can occur in that time. But the analytics only sees two data points and draws a straight line. Not a very accurate representation.
Cisco is leveraging what we know best, the network, to supplement the device probing. Bringing in network data allows us to gather higher data resolution regarding mobile device movement, equating to a more accurate representations of end user movement in the environment.
Why is This Important? Read More »
Tags: access point, accuracy, analytic, AP, battery life, data, device, driver, granular, interop, interval, location, mobile, movement, network, OS, Packet, probe, probing, resolution, rssi, Scalability, scale, wi-fi, wifi, wireless