Cisco Blogs


Cisco Blog > Data Center

ITD: Winner of the Best of Interop 2015

When the Best of Interop 2015 award winners were announced at the Mandalay Bay Convention Center in Las Vegas, the ITD team members couldn’t control their emotions. This team is well known to work in a startup-mode — comes up with new ideas, builds a prototype, demonstrates it to the executives and SEs, goes into execution mode, and delivers a world class solution.

As the leader of this team, I was asked by several media representatives for an interview. Here is an interview by Information Week news desk (watch full-screen for HD):

ITD (Intelligent Traffic Director) is now shipping on Nexus 9k/7k/5k series of switches.

Here is an informative blog on ITD.

 

Tags: , , , , , , , , , , , , , , , , , , , , ,

Interop 2015 : ITD is Best of Interop finalist

 

ITD (Intelligent Traffic Director) has been selected in Top 3 finalists in the Best of Interop 2015 Data Center category. ITD Delivers:

  • $2 Billion TAM disruptive technology: This technology innovation disrupts today’s $2 Billion TAM for load-balancers, redirection and clustering solutions
  • 100x Scale improvement: The high-end load-balancers today can handle about 200Gbps traffic. ITD can load-balance 20Tbps traffic.
  • 1000x cost-savings for customers: A 40Gbps L4 load-balancer costs about $200k to customers. ITD provides multi-Tbps load-balancing for a fraction of the price.
  • Zero Latency: ITD performs load-balancing, redirection, NAT and access control, all in one-clock cycle in hardware, hence it introduces zero latency.
  • 10x OPEX savings : Order of magnitude reduction in configuration, and ease of deployment
  • Overall CAPEX savings : Wiring, Power, Rackspace and Cost savings
  • 70+ customers interested in deploying within 1 month of shipping.
  • 10x High availability : N + M redundancy, health-monitoring and automatic failure handling
  • $15 Billion install-base can be leveraged: The technology has humongous market capture potential. It works on existing hardware. $15 Billion install-base of Nexus switches is able to use this technology.
  • 30+ patentable ideas: ITD has unprecedented innovations.

Cisco ITD (Intelligent Traffic Director) is a hardware based multi-Tbps Layer 4 load balancing, traffic steering and clustering solution on Nexus 9K/7K/6K/5K series of switches. It supports IP-stickiness, resiliency, NAT, (EFT), VIP, health monitoring, sophisticated failure handling policies, N+M redundancy, IPv4, IPv6, VRF, weighted load-balancing, bi-directional flow-coherency, and IPSLA probes including DNS. There is no service module or external appliance needed.

BOI15_Finalist_stacked_728x90

ITD has a lot of different types of use-cases. Some of these are:

  1. Create a multi-Tbps Firewall
  2. Create a multi-Tbps Video-cache
  3. Firewall/IPS/IDS/WAF load-balancing.
  4. Web Server load-balancing
  5. Application server load-balancing
  6. Replace WCCP. Redirect and Load-balancing traffic to Web-cache, WAAS, WAE
  7. Traffic steering to VDS/video-cache/Professional Media Network devices
  8. Load-balance to Hadoop/Big-data cluster.
  9. load-balancing to mobile equipment
  10. Load-balancing to Layer 7 load-balancers
  11. Replace legacy features such as ECMP, port-channel, PBR, etc

Recording of the presentation

 

Tags: , , , , , , , , , , , , , , , , , , , , ,

Cisco ITD is Best of Interop 2015 Finalist

Transforming Cisco switches into highly scalable zero latency load balancers! Cisco Intelligent Traffic Director (ITD) does exactly that and much more!

Cisco ITD  has been selected as Best of Interop 2015 finalist in the Data Center Category. Finalists were chosen from nine categories including Data Center, Mobility, SDN and Cloud Technologies.

BOI15_Finalist_728x90-550x68
Cisco Intelligent Traffic Director (ITD)  is an innovative solution to bridge the performance gap between a multi-terabit switch and gigabit servers and appliances. It is a hardware based multi-terabit layer 4 load-balancing, traffic steering and clustering solution on the Nexus 9K,7K,6K,5K series of switches. Customers do not have to buy any new hardware. It works on all the existing hardware, linecards and supervisors.

Here are some of the quotes from customers, account teams, industry analysts and architects:
“Great milestone Samar Sharma, Mouli Vytla, Rajendra Kumar Thirumurthi  and team! We are very grateful for the work you guys did with pioneering and driving this new solution!”

ITD  helped us scale to 1Tbps of cache traffic in single Nexus 7700 ”

“This feature seems almost too good to be true! I am very excited about it.”

“Customers really enjoyed the time and the subject. They said it was the best presentation of the week at Cisco Live”

“Turns out we likely have a far superior solution in ITD  that we can bring to the table.  One of our web space principles is ‘state is the enemy of scale’ and ITD aligns very well with this mentality without sacrificing too much flexibility or control. It is still early in our conversations but we are confident that ITD will play a strategic role for scaling services”

Click  to find out more! You can also visit Cisco Interop Booth at Interop Las Vegas to find out about Cisco ITD Solution!

Tags: , , , , , , , , , , , , , , , , ,

A Summary of Cisco VXLAN Control Planes: Multicast, Unicast, MP-BGP EVPN

With the adoption of overlay networks as the standard deployment for multi-tenant network, Layer2 over Layer3 protocols have been the favorite among network engineers. One of the Layer2 over Layer3 (or Layer2 over UDP) protocols adopted by the industry is VXLAN. Now, as with any other overlay network protocol, its scalability is tied into how well it can handle the Broadcast, Unknown unicast and Multicast (BUM). That is where the evolution of VXLAN control plane comes into play.

The standard does not define a “standard” control plane for VXLAN. There are several drafts describing the use of different control planes. The most commonly use VXLAN control plane is multicast. It is implemented and supported by multiple vendors and it is even natively supported in server OS like the Linux Kernel.

This post tries to summarize the three (3) control planes currently supported by some of the Cisco NX-OS/IOS-XR. My focus is more towards the Nexus 7k, Nexus 9k, Nexus 1k and CSR1000v.

Each control plane may have a series of caveats in their own, but those are not covered by this blog entry. Let’s start with some VXLAN definitions:

(1) VXLAN Tunnel Endpoint (VTEP): Map tenants’ end devices to VXLAN segments. Used to perform VXLAN encapsulation/de-encapsulation.
(2) Virtual Network Identifier (VNI): identify a VXLAN segment. It hast up to 224 IDs theoretically giving us 16,777,216 segments. (Valid VNI values are from 4096 to 16777215). Each segment can transport 802.1q-encapsulated packets, theoretically giving us 212 or 4096 VLANs over a single VNI.
(3) Network Virtualization Endpoint or Network Virtualization Edge (NVE): overlay interface configured in Cisco devices to define a VTEP

VXLAN with Multicast Control Plane
VXLAN1

Read More »

Tags: , , , , , ,

Enabling Data Center Services with RISE : Remote Integrated Services Engine

Data Centers are becoming increasingly smart, intelligent and elastic. With the advancement in cloud and virtualization technologies, customers demand dynamic workload management, efficient and optimal use of their resources. In addition the configuration and administration of Data Center solutions is complex and is going to become increasingly so.RISE

With these requirements and architectures in mind we have a industry first solution called Remote Integrated Service Engine (RISE).  RISE is a technology that simplifies provisioning, out of box management of service appliances like load balancers, firewalls, network analysis modules. It makes data center and campus networks dynamic, flexible, easy to configure and maintain.

RISE can dynamically provision network resources for any type of service appliance (physical and virtual form factors). External appliances can now operate as integrated service modules with Nexus Series of switches without burning a  slot in a switch . This technology provides robust application delivery capabilities that accelerate the application performance manifold.

RISE is supported on all Nexus Series switches with services like Citrix NetScaler MPX, VPX, SDX and Cisco Prime NAM with many more in the pipeline.

Advantages & Features

  1. Simplified Out-of-Box experience : reduces the administrator’s manual configuration steps from 30 to 8 steps !!
  2. Supported on Citrix NetScaler MPX, SDX, VPX, and Nexus 1KV with VPX
  3. Supported on Cisco Prime Network Analyzer Module
  4. Automatic Policy Based Routing – Eliminates need for SNAT or Manual PBR
  5. Direct and Indirect Attach mode integration
  6. Show module for RISE
  7. Attach module for RISE
  8. Auto Attach – Zero touch configuration of RISE
  9. Health Monitoring of appliance
  10. Appliance HA and VPC supported
  11.  Nexus 5K/6K support (EFT available)
  12. IPV6 support (EFT available)
  13. DCNM support
  14. Order of magnitude OPEX savings: reduction in configuration, and ease of deployment
  15. Order of magnitude CAPEX savings: Wiring, Power Rackspace and Cost savings

For more information, schedule an EFT or POC Contact us at nxos-rise@cisco.com

Resources

RISE press release on Wall Street Journal : http://online.wsj.com/article/PR-CO-20140408-905573.html
RISE At A Glance white paper: http://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/at-a-glance-c45-731306.pdf
RISE Video at Interop: https://www.youtube.com/watch?v=1HQkew4EE2g
Cisco RISE page: www.cisco.com/go/rise
Gartner blog on RISE: “Cisco and Citrix RISE to the Occasion”: http://blogs.gartner.com/andrew-lerner/2014/03/31/cisco-and-citrix-rise-to-the-adc-occasion/

Tags: , , , , , , , , , , , , ,