This is an amazing episode of Engineers Unplugged, where two technologists from the community, Hal Rottenberg (@halr9000) and Colin Lynch (@ucsguru) discuss how ACI disrupts traditional networking thinking while leveraging current networking skills. It’s a great tutorial for anyone looking to understand what application centric infrastructure really means.
Will network engineers all become programmers?
Watch and see:
This unicorn comes with birthday wishes–Happy 5th Birthday UCS!
Happy Birthday UCS Unicorn courtesy of Colin Lynch, with commentary by Hal Rottenberg!
**The next Engineers Unplugged shoot is at Varrow Madness, Charlotte, NC, March 20, 2014! Contact me now to become internet famous.**
This is Engineers Unplugged, where technologists talk to each other the way they know best, with a whiteboard. The rules are simple:
- Episodes will publish weekly (or as close to it as we can manage)
- Subscribe to the podcast here: engineersunplugged.com
- Follow the #engineersunplugged conversation on Twitter
- Submit ideas for episodes or volunteer to appear by Tweeting to @CommsNinja
- Practice drawing unicorns
Join the behind the scenes by liking Engineers Unplugged on Facebook.
Tags: ACI, application centric infrastructure, leaf and spine, networking, python, Splunk, UCS
I am not qualified to discuss it much, but can you guess what this does?
ne = NetworkElement("172.16.66.1", "JasonsApp")
conn = ne.connect("admin", "cisco", sc)
intf1 = ne.get_interface_by_name("FastEthernet0/1")
If you guessed that it logs into a switch at 172.16.66.1 and disables interface F0/1 for 5 seconds and re-enables it, then you guessed right.
Let us talk a little about putting the “ability” in programmability. Did I code in college? Yes. Was I good at it? Not really. Dijksta’s algorithm (the actual coding bit) drove me crazy, however, actually using and operating networks quickly became my cup of tea. I became a network geek. Subnets? Awesome! Cisco CLI? Sweet. Using Enhanced Interior Gateway Routing Protocol (EIGRP)? Yay! AVVID? Even better. But I never wanted to see C++ or another “program” again.
Fast forward to 2014. I’m still a networking guy but now I’m seeing code again. The good news is, maybe like you, I hang out with some really cool people. I challenged a couple of them to help me demonstrate program “ability” to networking people on the show floor at CiscoLive Milan…with me as the test subject! Read More »
Tags: #CLEUR, Cisco Live Milan, Cisco ONE, networking, onePK, programmability, Programming with Python, python
Editor’s Note: This is the second of a four-part deep dive series into High Density Experience (HDX), Cisco’s latest solution suite designed for high density environments and next-generation wireless technologies. For more on Cisco HDX, visit www.cisco.com/go/80211ac. Read part 1 here.
With any new technology comes a new set of obstacles to overcome. 802.11ac is no exception. Last week we talked about CleanAir for 802.11ac and why spectrum intelligence still matters. Another challenge is scalability. In this post I will give you some details on new HDX feature, Turbo Performance, which allows the AP 3700 overcome common scaling issues to scale amazingly well.
What’s Different with 802.11ac?
802.11ac means higher data rates, which means more packets per second (PPS). There are three reasons for more PPS with 11ac: wider channels, increased modulation and increased aggregation. Channel width doubled to 80 MHz, modulation increased from 64 QAM to 256 QAM, and aggregation increased from 64k to 1MB!
With 802.11n, an AP might have had to push 30,000 1500 byte packets per second through the APs data plane. Today with 802.11ac that could now be 75,000+ PPS. More PPS means more load on the APs CPU, so to really keep up with the demands of 802.11ac, we needed to go back to the drawing board. Read More »
Tags: 802.11ac, access point, aggregation scheduler, antenna, AP, byte, Cisco, cpu, data plane, Enterprise, HD, HDX, high density, increased aggregation, modulation, multi-client, network, networking, packet scheduler, packets per second, performance, pps, qam, radio, scale, technology, wi-fi, wifi, wireless
Editor’s Note: This is the first of a four-part deep dive series into High Density Experience (HDX), Cisco’s latest solution suite designed for high density environments and next-generation wireless technologies. For more on Cisco HDX, visit www.cisco.com/go/80211ac.
CleanAir for 802.11ac: Why Spectrum Intelligence Still Matters
In wireless networking and communications, as with life, nothing good comes for free. It’s well known that the primary feature of the new IEEE 802.11ac amendment is support for an 80 MHz-wide channel. The benefit of an 80 MHz channel is the potential to double usable throughput in comparison to that of 802.11n using a 40 MHz wide channel.
However, what is less well known is that a wider RF channel is also more susceptible to interference. In other words, 802.11ac devices “hear more” than 802.11n devices, primarily due to the wider channel support. It should be noted that this is not a flaw in the 802.11ac amendment, it’s simply basic communications theory.
Nevertheless, there is far more to building an 802.11ac access point than simply meeting the standard. Not all 802.11ac access points perform equally without interference. But more importantly, not all 802.11ac access points perform well in the presence of interference.
Furthermore, there is far more to deploying High Density wireless LANs than only considering the performance of individual access points. Read More »
Tags: 11ac, 802.11ac, applications, apps, bandwidth, Cisco, cleanair, device, gigabit, HDX, high density, mobile, mobility, network, networking, spectrum intelligence, user experience, wi-fi, wifi, wireless
A new year means new users and new devices. More devices means more network crowding. Mobile users demand bandwidth and speed, while the network is increasingly overwhelmed by the sheer number of devices. The networks of today and tomorrow have to be ready for high client density environments.
That’s why we’ve developed the Cisco High Density Experience (HDX). I announced HDX in a blog last October with a high level look at Cisco’s answer to handling high client density environments. Each feature in the HDX solution was designed specifically to alleviate the introduction of more clients, more bandwidth hungry applications to provide an unparalleled user experience.
Starting tomorrow we’ll kick off an HDX blog series to dive deep into the four key features that come with HDX:
- January 8: CleanAir
- January 13: Turbo Performance
- January 27: ClientLink 3.0
- February 10: Optimized Roaming
For more on Cisco’s approach to 802.11ac, visit www.cisco.com/go/80211ac.
Tags: 11ac, 802.11ac, applications, apps, bandwidth, Cisco, device, gigabit, HDX, high density, mobile, mobility, network, networking, user experience, wi-fi, wifi, wireless