During the Cisco Live! event in San Diego, CA, the Aironet 1850 Access Point was unveiled to the public. Now Cisco has followed up the device’s debut and has announced the orderability and the shipping of the Aironet 1850 AP.
A perfect fit for any small or medium-sized networks, the Cisco Aironet 1850 AP is an entry-level device boasting cutting-edge 802.11ac Wave 2 capabilities that offers faster client performance. This high performance is enabled by multi-user, multi-in, multi-out (MU-MIMO) and the ability to offload to wired networks with two gigabit Ethernet ports.
When your network upgrades to Wave 2, you are afforded the abilities to take advantage of increased wireless bandwidth and to handle the demands of many more devices at one time. Gone are the days of slow and bottlenecked WiFi speeds. With a Wave 2 migration, you’re essentially stretching the bandwidth you already have.
The devices that connect to the Cisco Aironet 1850 AP don’t all have to be Wave 2 compliant. The AP supports the newest generations of WiFi clients as well as any of the previous generations.
For more information or to order the Cisco Aironet 1850 AP, please go here.
Tags: 802.11ac wave 2, Aironet 1850 Access Point, Cisco Mobility, Cisco Wireless, mu-mimo
Fundamentals of 802.11ac Wave 2 from TechWiseTV
How well do you understand this Wave 2 release of the 802.11ac specification? Our latest ‘Fundamentals of’ addresses the technical differentiators and the potential pitfalls you should be aware of. There is a lot of power in this wave.
Just 5 Minutes to increase your knowledge: WATCH NOW
I put the full script at the bottom of this blog if interested.
Watch some of the earlier wireless fundamentals for even more wireless innovation and (IMHO) great background:
Read More »
Tags: 802.11ac, 802.11ac wave 2, CiscoMobility, Ethernet Base-T, IEEE, mimo, mobility, mu-mimo, wifi
802.11ac is the hottest topic of discussion and deployment in WiFi over the past couple of years. Ratified as a standard by the IEEE in November 2013, the first phase of 802.11ac products brought to market is commonly referred to as Wave 1, and provides roughly a 3x improvement in network performance over its predecessor 802.11n: 1.3 Gbps compared to 450 Mbps in 5 GHz respectively when utilizing the maximum channel width and modulation supported .
Next up 11ac Wave 2, the next phase in 802.11ac, will begin entering the market later in 2015 in the form of both new client devices (smartphones, tablets, laptops) and new Access Points and modules, providing two significant enhancements building on Wave 1
Multi User MIMO MU-MIMO
160 MHz channel width support
MU-MIMO will enable a Wave 2 AP to talk with multiple Wave 2 clients Read More »
Tags: 802.11ac, 802.11ac wave 2, CiscoMobility, Ethernet Base-T, IEEE, mimo, mu-mimo, wifi
The wireless world is going through rapid changes. 802.11ac, the fifth generation of WiFi, is poised for accelerated deployment which will dramatically change the user experience with more bandwidth, more speed and a higher number of concurrent client connections. In fact, nearly a quarter of all new access points in the enterprise are now 802.11ac, as suggested in a December 2014 Infonetics WLAN market report. Read More »
Tags: 6.8 Gbps, 802.11ac wave 2, access switching, Catalyst switching, Cisco Live Milan, mu-mimo, multigigabit, NBASE-T Alliance
If you recall, back in the early days of 802.11n, the Wi-Fi Alliance (WFA) rolled out the 802.11n certification program in phases. Here we are several years later and in that same fashion, the WFA has split the IEEE 802.11ac specification into two certification phases: Wave 1 and Wave 2.
Last week we announced the availability of our 802.11ac Wave 1 Module for the 3600 Access Point and along with that, our intention to develop an 802.11ac adaptive radio module that will support the second phase of 802.11ac, or Wave 2. Most of the 802.11ac discussion in the last year has been focused on Wave 1, so we want to kick off the conversation about the second phase, Wave 2.
If Wave 1 promises increased wireless performance to address the increasing demand for higher performance including growing number of clients demanding higher performance for applications such as HD video streaming, then Wave 2 will stun you with its ability to provide even more throughput beyond the 1.3Gbps that Wave 1 provides as well as a number of other features that will further improve wireless connectivity. It is like taking a really good rock song and adding more cowbell to it.
SNL jokes aside, with the additional features packaged in Wave 2 comes the opportunity for further innovation in Cisco’s Wireless portfolio. We feel that it is important to stay ahead of the technology curve so that customers can plan and benefit from these advances sooner rather than later. So let’s discuss what features are coming with 802.11ac Wave 2. Read More »
Tags: 802.11, 802.11ac, access point, Cisco, cleanair, controller, gigabit wifi, IEEE, LAN, mu-mimo, multi-in multi-out, multiple user, network, spatial streams, technology, WAN, wave 1, wave 2, wi-fi, wifi, wireless, wireless standard, wlan