Fundamentals of 802.11ac Wave 2 from TechWiseTV
How well do you understand this Wave 2 release of the 802.11ac specification? Our latest ‘Fundamentals of’ addresses the technical differentiators and the potential pitfalls you should be aware of. There is a lot of power in this wave.
Just 5 Minutes to increase your knowledge: WATCH NOW
I put the full script at the bottom of this blog if interested.
Watch some of the earlier wireless fundamentals for even more wireless innovation and (IMHO) great background:
Read More »
Tags: 802.11ac, 802.11ac wave 2, CiscoMobility, Ethernet Base-T, IEEE, mimo, mobility, mu-mimo, wifi
802.11ac is the hottest topic of discussion and deployment in WiFi over the past couple of years. Ratified as a standard by the IEEE in November 2013, the first phase of 802.11ac products brought to market is commonly referred to as Wave 1, and provides roughly a 3x improvement in network performance over its predecessor 802.11n: 1.3 Gbps compared to 450 Mbps in 5 GHz respectively when utilizing the maximum channel width and modulation supported .
Next up 11ac Wave 2, the next phase in 802.11ac, will begin entering the market later in 2015 in the form of both new client devices (smartphones, tablets, laptops) and new Access Points and modules, providing two significant enhancements building on Wave 1
Multi User MIMO MU-MIMO
160 MHz channel width support
MU-MIMO will enable a Wave 2 AP to talk with multiple Wave 2 clients Read More »
Tags: 802.11ac, 802.11ac wave 2, CiscoMobility, Ethernet Base-T, IEEE, mimo, mu-mimo, wifi
This week we finished our biggest product announcement in recent memory.The various teams worked hard to bring out to our partners and customers products that delivered maximum quality, flexibility and value.
One of the products included was the new Cisco Small Business WAP371 Wireless Access Point. This Access Point is the first 802.11ac model in the portfolio representing a paradigm shift in the way you as a business owner can improve wireless performance for your business. This new model has a dual radio, includes a Gigabit Ethernet (GbE) Power-Over-Ethernet (PoE) LAN port and has the ever-popular Single Point Set-up capability. The WAP371 also features Captive Portal for guests, and like the rest of the wireless portfolio, offers simple set-up and deployment with an intuitive user interface and set-up wizards.
But this release raises the question regarding exactly why you should think about upgrading your small business wireless network.
Nasser Tarazi, Product Manager for the Cisco Small Business Wireless Access Points, talks about reasons why to take a look at the all-new WAP371.
“Right now is a good time for Small Businesses to consider upgrading their wireless networks from older 802.11 technologies to 802.11ac. First-off, 802.11ac is three times faster than it’s predecessor, 802.11n. The use of Multiple-Antenna, Multiple-in, Multiple-out technology (MIMO) reliably delivers this boost in performance providing for a much better user experience.”
Nasser goes on, “We expect over 70% of mobile devices will be 11ac-enabled by 2016. Like mentioned before, 11ac is three times faster than 11n, so from business-critical to social media applications, improved wireless high-speed performance will ensure your applications will run smoothly, reliably. Also, range is better, even for 11n enabled devices.”
“Security is on every business owner’s mind. 802.11ac is more secure than 11n. And in fact, 11ac is also more power efficient, which can result in a 30% improvement in battery life for your wireless devices such as mobile phones and tablets. Finally, 11ac provides for greatly improved client density, so high-client use cases such as schools, churches, and other organizations will greatly benefit from the upgrade to 11ac.”
Check out our FAQ and the WAP371 product page for more information.
Thanks for your time!
Marc and Nasser
Tags: 11ac, 11n, access, business, Cisco, flexible, LAN, mimo, network, performance, point, QoS, quality, router, single point set-up, small, spatial stream, switch, WAP, wireless, wlan
Hey folks, I’m back in the blogosphere to make a super exciting announcement.
The Cisco Aironet 3600 Series Access Point with its purpose built best-in-class Wireless performance, industry’s first and only Enterprise Class AP to support 802.11n with 4×4 MIMO architecture, and signature modular design was launched in January 2012 at Cisco Live! London. Cisco was first to market with an 802.11ac wave 1 solution and first to be published with WiFi Alliance certification. Just 18 months since launching, the flagship 3600 AP has now surpassed the ONE MILLION mark in units shipped!
We designed the access point with modular architecture in mind to give our customers more flexibility for upcoming technological innovations in the wireless space. Since the initial launch, we have announced three exciting modules tailored to help our customers meet their wireless needs: Wireless Security and Spectrum Intelligence, 3G Small Cell, and most recently 802.11ac Wave 1. The modules have been extremely successful, having deployed 40K units of the .11ac module and 10K units of the Wireless Security and Spectrum Intelligence module, which speaks volumes about the versatility of the 3600 Access Point. Read More »
Tags: #80211ac, 1 million, 11ac, 3600AP, 4x4, 802.11ac, access point, Aironet, AP3600, Cisco, gigabit, mimo, radio module, wi-fi, wifi, wireless, wlan
It was not that long ago that whenever I read an article about IPv6, it usually discussed how the IPv4 Address depletion in other countries. At that time, the adoption of IPv6 was coming from other countries that where the v4 address space was depleted, the US Government, or Service Provider. Well fast forward only a few years and you can include Enterprise Networks in that mix.
Driving this IPv6 train for enterprise networks is wireless technology and the enabling by-product, BYOD. Wireless technology, in particular, Wi-Fi has grown from a toy to a requirement in most businesses today. We have moved from 802.11b which gave you a max datarate of a paltry 11Mbps to 802.11n to a max datarate of 450Mbps if you currently deploy the Aironet 3600 Access Point that supports 4×4 MIMO; if not, it’s a max datarate of 300Mbps. Never mind the fact that we will soon see the Wave 1 version of 802.11ac will have a datarate of 1.3Gbps and Oh BTW, Wave 2 promises a scorching datarate of 6.9Gbps!
Read More »
Tags: 802.11, access point, Aironet, bring your own device, byod, Enterprise, government, ipv4, IPv6, mbps, mimo, network, networking, Service Provider, wireless, wireless technology