By now you’ve probably heard quite a bit about the newest generation of Wi-Fi, 802.11ac. I’ll save you the gory details, just know it’s about 3x faster than 802.11n and will help to improve the capacity of your network. Jameson Blandford and I were recently guests on the No Strings Attached Show podcast with Blake Krone and Samuel Clements (Click to listen to the podcast).
I wanted to follow up the podcast with a blog to go over considerations for deploying, testing, and tuning 802.11ac.
Considerations for deploying 802.11ac
The first question you’ll want to ask yourself, is, if your switching infrastructure can handle 11ac? The answer probably is, yes. The things to consider are the port speed and power-over-Ethernet (PoE) capabilities. You’ll want the access point to have a gigabit uplink to the switch. Each 11ac access point could potentially dump several hundred megabits per second of traffic onto your wired network. It’s also not a bad idea to have 10 Gig uplinks on your access switches to distribution or your core. If you have even just a couple access points on a single access switch, you may quickly find yourself wishing you had 10 Gig uplinks.
Next you’ll need to consider how you will power the access points. If you are like the majority of our customers, you will use PoE from your switches. While 11ac access points require 802.3at (PoE+) for full functionality, the Aironet 3700 will run happily on standard 802.3af PoE. In fact, it remains 3 spatial-streams on both radios, so performance does not suffer because you have a PoE infrastructure.
Will you deploy 80 MHz channels? Read More »
Tags: 11ac, 11n, 802.11, 802.11ac, 802.11n, access point, Aironet, chanalyzer, cleanair, deploying, Enterprise, gigabit, infrastructure, macbook, metageek, mobility, network, network engineer, networking, omnipeek, performance test, performance testing, podcast, PoE+, Prime Infrastructure, spatial stream, Testing, tuning, wi-fi, wifi, wild packets, wireless, wireshark