The Global Certification Team is proud to announce the FIPS 140-2 Crypto certification of the 6900 and 7900 Series IP Phones.
The phones received FIPS certificate #1647 for Models 6901 and 6911 and Certificate #1650 for 6921, 6941, 6945, and 6961. Finally the 7906G, 7911G, 7931G, 7941G, 7942G, 7945G, 7961G, 7961GE, 7962G, 7965G, 7970G, 7971G, 7971GE, and 7975G were awarded FIPS certificate #1689.
Take full advantage of converged voice and data networks while retaining the convenience and user-friendliness you expect from a business phone. Cisco Unified IP Phones can help improve productivity by meeting the needs of users throughout your organization. Advanced media endpoints in this innovative suite of Cisco Unified IP Phones enhance the end-user experience.
6900 Series on Cisco.com
7900 Series Phones on Cisco.com
FIPS-140 is a US and Canadian government standard that specifies security requirements for cryptographic modules. A cryptographic module is defined as “the set of hardware, software, and/or firmware that implements approved security functions (including cryptographic algorithms and key generation) and is contained within the cryptographic boundary.” The cryptographic module is what is being validated.
Tags: 6900, 6901, 6911, 6921, 6941, 6945, 6961, 7900, 7906, 7911, 7931, 7941, 7942, 7945, 7961, 7962, 7965, 7970, 7971, 7975, Cisco, cmvp, crypto, cryptography, fips, FIPS 140-2, ip, NIST, phone, srtp, unified
Cisco just released the 2012 edition of its mobile VNI* report, entitled “Cisco VNI Mobile Data Traffic Forecast, 2011-2016.”
The report’s conclusion: a tsunami of mobile data traffic is headed our way, growing in size and speed through 2016 and likely beyond. Over the next five years, mobile data traffic worldwide will grow 18-fold!
Read More »
Tags: 2011-2016, Cisco, forecast, ip, ip traffic, mobile devices, mobile vni, mobility, visual networking index, vni
It’s that time of year: take a break, reflect, maybe clean up the hard drive.
I had a chance to do the reflection part last week, and came up with what I hope is a pretty good weave of what Service Providers experienced over the last 12 months.
Here is my ‘take’ on the top five trends of the whirlwind year that is still, for a week or two, 2011:
1. In the crawl-walk-run sequence as it relates to the global shift to all-IP, 2011 went from “crawl” to “jog” — skipping “walk” entirely.
Think about it. Think about all of it, which is a lot, when it comes to the global transition to all-IP: Fixed networks; mobile Internet, Video, Cloud.
Across the world, wherever there is IP, there was monumental change in 2011. While 2010 was a year of anticipation and preparation, 2011 teemed with news and trends about the burgeoning Internet: more Video, more emphasis on mobile broadband; more work on keeping the “big iron” routing and switching fabrics around the world plumbed to keep up with demand.
We continued to do our best to keep up with the enormity of all-IP, with our ongoing VNI (Visual Networking Index) and Cloud Index forecasts. We’re still anticipating a quadrupling of Internet traffic by 2015, mostly because of video usage by mobile and “connected” IP devices. Lots more data here.
2. Video (still) trumps as the biggest driver in Internet / IP usage. Read More »
Tags: 2011, cloud index, ip, mobile broadband, reflection, Service Provider, video, videoscape, visual networking index, vni
The Cisco Global Certification Team (GCT) is proud to announce the completion of USGv6 and ReadyLogo Phase 2 certifications for the following Cisco products:
- 4500-SUP7E USGv6 and ReadyLogo Phase 2
- ISR-G2 IPSec ReadyLogo Phase 2
- Linksys E4200 USGv6 and ReadyLogo Phase 2
- 79xx IP Phone USGv6 and ReadyLogo Phase 2
- ACE4710 USGv6 and ReadyLogo Phase 2
- ACE 30 blade for 6500 USGv6 and ReadyLogo Phase 2
- ACE 30 blade for 7600 USGv6 and ReadyLogo Phase 2
- Sx200 SOHO switch USGv6 and ReadyLogo Phase 2
- Sx300 SOHO switch USGv6 and ReadyLogo Phase 2
- ASR1K ReadyLogo USGv6 (retest) and ReadyLogo Phase 2
Read More »
Tags: 79xx, ACE, ASR1K, Cisco, g2, ip, IPv6, ISR, Phones, ReadyLogo, USGv6
By Mark Palazzo, VP and GM of Cisco’s Cable Access Business Unit
Just a few more days until the start of this year’s SCTE Cable-Tec Expo, to be held in Atlanta from Nov. 14-17. We’re excited to see y’all in our fair city! A lot will go on next week, so we thought we’d put out some signposts about where you can find us, what we’re doing, and what we want to show you while you’re there.
Where you can find us and what we want to show you: We’re piling in to booth #1762, where we’ll be showing everything we’re working on to reinvent the television experience. That means:
- The Videoscape Experience: “Videoscape” incorporates cloud, network and client devices to drive new video experiences over traditional and Internet-based networks. That means freeing viewers from the traditional bounds of time, place and platform, towards the realities of anytime, anywhere, any screen.
Specifically, we’ll demonstrate the integration of linear, on-demand and over-the-top content, with our Media Suite – a full lifecycle content management system, for both managed and unmanaged (consumer-purchased) devices. As in set-tops, soft clients, Internet TVs, tablets, smart phones, you name it.
Also on hand: Ways to distribute media inside and outside the home, using our Media Gateway family of products, as well as our “Conductor” – a standards-based, real-time network and device management tool designed specifically for service providers. Read More »
Tags: cable, cable operator, cable-tec, docsis, ip, ip challenge, scte, scte cable-tec expo, Service Provider, videoscape