In my last blog I discussed setting the stage in preparation for the Wi-Fi network for Mobile World Congress 2014 which supported more than 80k devices over a span of 4 days. Today I’ll talk about one of the many site surveys we conducted at the Fira Gran Via to ensure the success of our high density network. Full details in the white paper here.
High Density Wi-Fi deployments and site surveys go hand in hand. Pre-installation and post-installation site surveys account for the most effective way to identify the contours of your RF coverage and eliminate potential multipath distortions, hidden nodes, and other coverage issues. Special attention was given to the large keynote auditorium halls in order to keep a check on the additional RF coverage needs to accommodate the high density of users packed in a very close range.
View of inside the Hall-4 Keynote Auditorium (23000 sq ft) before the Facebook keynote session
Site Survey analysis used to measure the RF coverage in Hall-4 keynote auditorium
The Hall-4 auditorium was one example of such a high density area with the 2000 person capacity area had a peak connection of 1924 concurrently connected Wi-Fi devices distributed across 16 Cisco APs while the Facebook keynote was in progress, with a max load of 530 Mbps of internet traffic. To avoid an RF overlap, the ceiling mounted APs above the auditoriums were converted to monitor mode. Using the final pre-keynote site survey data, the RF profile for the Hall-4 auditorium was tweaked, and RRM automatically optimized the coverage to the desired degree by adjusting the Tx power levels. Read More »
Tags: access point, AP, application, barcelona, beamforming, Cisco, client, coverage, data transfer, deployment, device, Dual Band, event, experience, fira gran via, GHz, HD, HDX, hidden node, high density, hotspot2.0, infrastructure, internet, keynote, mobile world congress, multipath distortion, mwc, network, network operations, radio resource managmeent, rf, RRM, rx-sop, site survey, TB, traffic, traffic pattern, user density, users, wi-fi, wifi, wireless, wireless data transfer
Every year a new attendance record is set at Mobile World Congress by networkers participating from over 200 countries across the globe. This grand attendance of industry-defining vendors, technology enthusiasts and exhibitors triggers an explosive growth in the number of Wi-Fi capable devices being brought to the event. For MWC 2014, Cisco partnered with Fira Gran Via and GSMA to pull off one of the most successful high density Wi-Fi network deployments in the history of global tech events. This blog kicks off a series to provide a glimpse of behind the network, into the design stages, and the course of actions undertaken to implement a robust high density wireless network which served more than 22,000 concurrently connected unique devices and a total of 80,880 devices throughout the event. Full details in whitepaper here.
Setting the Scene
Divided into eight massive exhibition halls, Fira Gran Via covers around 3 million square feet (280,000 square meters) of area which also includes outdoor areas, restaurants, conference rooms, network lounges and a continuous elevated walkway flowing through the entire venue. Higher the environmental complexity, the more fun and challenging it is to achieve the right wireless design for a pervasive network that meets all the needs.
An aerial view of Mobile World Congress 2014 arena at Fira Gran Via, Barcelona
Generally, the physical design of large convention and exhibition halls bear an impish knack of unfavorable conditions for a ubiquitous high density Wi-Fi network, owing mostly to the lofty ceiling heights and construction components. Read More »
Tags: 2.4 GHz, access point, antenna, antennas, AP, architect, barcelona, beamforming, cell isolation, cleanair, ClientLink, convention center, coverage, deployment, design, device, event, fira gran via, GHz, hardware, HD, HDX, high density, infrastructure, interference, management, mobile, mobile world congress, mobility, mwc, network, networking, radio resource management, rf, RRM, rx-sop, site survey, site visit, tech, technology, venue, wi-fi, wifi, wireless
It’s always interesting and often entertaining to observe how competitors promote their products and what they choose to focus on—and more importantly, what they choose not to focus on and what they hope people won’t ask questions about.
Consider yet again how a competitor chooses to position their “purpose built” AP vs. the Cisco Aironet 3700 802.11ac Access Point Series.
This competitor frequently (and somewhat obsessively) points out that its 802.11ac AP has dual “active” 800 MHz cores while the Cisco AP3700 has only one “active” 800 MHz core. This is not completely true since it completely overlooks the fact that the Cisco AP3700 also has a dedicated CPU core and DSP for each radio subsystem.
Furthermore, it also overlooks that the dual “active” cores in the competitor’s AP share 512 MB of DRAM. The single “active” core of the AP3700 has dedicated 512 MB of DRAM. Also each radio subsystem has a dedicated 128 MB DRAM (for 768 MB total DRAM in the AP3700).
Why is all of this important? Read More »
Tags: 11ac, 802.11ac, access point, AP, architecture, ASIC, client, compute, Computing, design, device, DRAM, efficiency, hardware, HD, HDX, high density, Industry, infrastructure, LAN, MB, memory, memory management, Mhz, mobile, mobility, network, networking, performance, rf, system, wi-fi, wifi, wireless, wlan
Englewood Cliffs public schools system, based in Bergen County, New Jersey offers classes to children from K-8 grades. The school system consists of two schools, the North Cliff school serving grades from K-2 and the Upper school serving grades from 3-8. The school system utilizes cutting-edge technology to assist learning from the classrooms equipped with technology, the 1 to 1 computer tablet initiative to the 6th, 7th and 8th graders to upgrading to the best-in-class wired and wireless infrastructure needed to support the advanced technologies.
At a Glance:
Located in: Bergen County, New Jersey
Number of students: 478
Number of teachers: 39
Access-Points: Thirty three units of 3602i with the 802.11ac module and two units of 3602e
Switch and Controller: Ten units of 3850 Series switch, that offers 40 Gig of line-rate performance even with imix traffic. Wireless LAN controller functionality is run within the switch itself. The switches are deployed in stacks of two and the rest are single switches. The wireless controller functionality is operating on the main stack in each school MDF. Operating in the latest release IOS-XE 3.3.3 Read More »
Tags: 11ac, 802.11, 802.11ac, access point, controllers, Converged Access, customer, deployment, education, englewood cliffs, equipment, Gig, imix, infrastructure, initiative, IOS XE, K-8, macbook, mdf, network, performance, school, switch, tablet, technology, UA, unified access, wi-fi, wifi, wired, wireless, wlan
Gartner has released their 2014 Magic Quadrant for Wired and Wireless LAN Infrastructure. For the 3rd year in a row, Cisco is recognized as a leader in both vision and execution. We believe this Gartner recognition is validation of Cisco strategy and investments for unified access, policy management and cloud managed solutions.
Cisco’s position in the Wired and Wireless Gartner MQs has been consistent over the past 3 years as the market landscape has shifted we believe validating our commitment to meeting shifting customer priorities and requirements.
The 2014 Gartner Magic Quadrant for the Wired and Wireless LAN Access Infrastructure (Authors: Tim Zimmerman, Andrew Lerner, Bill Menezes; Published 26th June 2014) reflects the evolution from prior years and highlights what customers are looking for:
“With limited growth in IT resources, administrators require one network management application, one access security solution, one guest access application or one policy enforcement solution with the flexibility to be deployed in a public cloud, private cloud or on-premises. This integration reduces the costs associated with the upfront capital expense of multiple network service applications each dedicated to either the wired infrastructure or the wireless or cloud components. This savings is also extended to the ongoing software maintenance costs of all access layer management, security and policy enforcement components.”
What Does Being a Leader Mean? Read on for the full story Read More »
Tags: #80211ac, #wireless, 802.11ac, access, access point, analyst, App, application, aruba, Cisco, customer, data, enforcement, Gartner, HP, Industry, infrastructure, IT, LAN, landscape, leader, Magic Quadrant, market, mobile, mobility, MQ, network, policy, quadrant, secure, security, service, technology, unified access, wifi, wired, wireless, wlan