In the previous article we looked at some of the physical characteristics of building a SAN extension. In other words, we looked at the different ways there are to “build the pipe.” We didn’t, however, get the chance to talk about the speed or capacity of the pipes, nor did we talk about the various methods to fill the pipe with SAN data.
In this article, we’re going to look at the first of four specific methods of how we can extend SANs across distances using those pipes: “Native” Fibre Channel (FC). Understanding how FC works becomes critical for understanding how distance solutions are resolved using the technology, and that in turn leads us to understand how something like Fibre Channel over Ethernet (FCoE) differs.
Afterwards, we’ll take a brief look at how the pieces fit together and are part of the process for building a strong solution. Read More »
In the last article, we looked at the big picture of what is involved in creating a SAN distance extension. In this article, we’re going to take a slightly closer look at the physical requirements and with luck we’ll be able to clear up some general confusion and misconceptions along the way.
There is a lot of information about these different elements available via a quick search on your favorite search engine. What I find, though, is that there is usually very little context that accompanies the descriptions or, at best, the authors assume that you may have more of an understanding about some of these technologies than you do. In this case, if I’m going to err it will likely be on the side of making it too accessible and in Plain English, which is something I can live with.
As usual, this is a mid-level view. There are many deep dives that will go into each subject in fine-toothed detail available on the web, but we’re going to stay focused on what you need to know for extending SANs across distances.
Again, this is a rather long post, but hopefully it will be useful as a reference point for you. Read More »
Problem is, whenever you start talking about extending your storage connectivity over distance, there are many things to consider, including some things that many storage administrators (or architects) may not always remember to think about. The more I thought about this (and the longer it took to write down the answers), the more I realized that there needed to be a good explanation for how this worked.
Generally speaking, the propeller spins the ‘other way’ when it comes to storage distance.
To that end, I began writing down the things that affect the choice for selecting a distance solution, which involves more than just a storage protocol. And so the story grew. And grew. And then grew some more. And if you’ve ever read any blogs I’ve written on the Cisco site you’ll know I’m not known for my brevity to begin with! So, bookmark this article as a reference instead of general “light reading,” and with luck things will be clearer than when we started. Read More »
The data center landscape has changed dramatically in several dimensions. Server virtualization is almost a defacto standard with a big increase in VM density. And there is a move towards world of many clouds. Then there is the massive data growth. Some studies show that data is doubling in every 2 years while there is an increased adoption of solid-state drives (SSD). All of these megatrends demand new solutions in the SAN market. To meet these needs, Cisco’s introducing the next generation Storage Network innovations with the new MDS 9710 Multilayer Director and new MDS 9250i Multiservice Switch. These new multi-protocol, services-rich MDS innovations redefine storage networking with superior performance, reliability and flexibility!
We are, once again, demonstrating Cisco’s extraordinary capability to bring to market innovations that meet our customer needs today and tomorrow.
For example, with the new MDS solutions, we are announcing 16 Gigabit Fibre Channel (FC) and 10 Gigabit Fibre Channel over Ethernet (FCoE) support. But guess what? This is just couple of the many innovations we are introducing. In other words, we bring 16 Gigabit FC and beyond to our customers:
A NEW BENCHMARK FOR PERFORMANCE
We design our solutions with future requirements in mind. We want to create long term value for our customers and investment protection moving forward.
The switching fabric in the MDS 9710 is one example of this design philosophy. The MDS 9710 chassis can accommodate up to six fabric cards delivering:
1.536 Tbps per slot for Fibre Channel – 24 Tbps per chassis capacity
Only 3 fabric cards are required to support full 16G line rate capacity
Supports up to 384 Line Rate 16G FC or 10G FCoE ports
So there is room for growth for higher throughput in the future …without forklift upgrades
This is more thanthree times the bandwidth of any Director in the market today – providing our customers with a superior investment protection for any future needs!