Mobile World Congress (MWC) 2014 was the largest mobile industry exhibition in the world, where over 1800 companies showcased and launched their latest products and services. This event was visited by over 85,000 attendees from over 200 countries around the world, to learn, network, inspire and innovate. Providing them seamless and robust data network was the first priority. GSMA , Fira de Gran Via and Cisco took this challenge to provide them next generation Wi-Fi experience with seamless connectivity and onboarding using Hotspot 2.0 service on the top of baseline free Wi-Fi service.
Hassle and risk are the two key factors involved in connecting free public Wi-Fi. When you are traveling in the different countries, you get off the plane and turn on your cell phone… and within few seconds you get connected to the cellular network. There is no need to search for a suitable network manually (hoping it’s not rigged by a hacker), then enter long password or credit card details to pay for the service. But unfortunately connecting to Wi-Fi is not that simple. Hotspot 2.0 Service addresses these problems by automatic network discovery and selection, seamless network access and secured authentication for the Passpoint certified devices.
Fira Gran Via, Barcelona, the venue of MWC 2014 is a massive 280,000 meters2 (Three Million Square Feet) facility with 8 grand exhibition halls, conference rooms, multiple outdoor areas and restaurants. Read More »
Tags: #MWC14, barcelona, cell, cell phone, cellular, cellular network, Cisco, connectivity, data, device, experience, fira de gran via, GSMA, HDX, high density, Hotspot, HS2.0, mobile, mobile world congress, mwc, network, onboarding, Passpoint, public, seamless, technology, wi-fi, wifi, wireless
In my last blog I discussed setting the stage in preparation for the Wi-Fi network for Mobile World Congress 2014 which supported more than 80k devices over a span of 4 days. Today I’ll talk about one of the many site surveys we conducted at the Fira Gran Via to ensure the success of our high density network. Full details in the white paper here.
High Density Wi-Fi deployments and site surveys go hand in hand. Pre-installation and post-installation site surveys account for the most effective way to identify the contours of your RF coverage and eliminate potential multipath distortions, hidden nodes, and other coverage issues. Special attention was given to the large keynote auditorium halls in order to keep a check on the additional RF coverage needs to accommodate the high density of users packed in a very close range.
View of inside the Hall-4 Keynote Auditorium (23000 sq ft) before the Facebook keynote session
Site Survey analysis used to measure the RF coverage in Hall-4 keynote auditorium
The Hall-4 auditorium was one example of such a high density area with the 2000 person capacity area had a peak connection of 1924 concurrently connected Wi-Fi devices distributed across 16 Cisco APs while the Facebook keynote was in progress, with a max load of 530 Mbps of internet traffic. To avoid an RF overlap, the ceiling mounted APs above the auditoriums were converted to monitor mode. Using the final pre-keynote site survey data, the RF profile for the Hall-4 auditorium was tweaked, and RRM automatically optimized the coverage to the desired degree by adjusting the Tx power levels. Read More »
Tags: access point, AP, application, barcelona, beamforming, Cisco, client, coverage, data transfer, deployment, device, Dual Band, event, experience, fira gran via, GHz, HD, HDX, hidden node, high density, hotspot2.0, infrastructure, internet, keynote, mobile world congress, multipath distortion, mwc, network, network operations, radio resource managmeent, rf, RRM, rx-sop, site survey, TB, traffic, traffic pattern, user density, users, wi-fi, wifi, wireless, wireless data transfer
Every year a new attendance record is set at Mobile World Congress by networkers participating from over 200 countries across the globe. This grand attendance of industry-defining vendors, technology enthusiasts and exhibitors triggers an explosive growth in the number of Wi-Fi capable devices being brought to the event. For MWC 2014, Cisco partnered with Fira Gran Via and GSMA to pull off one of the most successful high density Wi-Fi network deployments in the history of global tech events. This blog kicks off a series to provide a glimpse of behind the network, into the design stages, and the course of actions undertaken to implement a robust high density wireless network which served more than 22,000 concurrently connected unique devices and a total of 80,880 devices throughout the event. Full details in whitepaper here.
Setting the Scene
Divided into eight massive exhibition halls, Fira Gran Via covers around 3 million square feet (280,000 square meters) of area which also includes outdoor areas, restaurants, conference rooms, network lounges and a continuous elevated walkway flowing through the entire venue. Higher the environmental complexity, the more fun and challenging it is to achieve the right wireless design for a pervasive network that meets all the needs.
An aerial view of Mobile World Congress 2014 arena at Fira Gran Via, Barcelona
Generally, the physical design of large convention and exhibition halls bear an impish knack of unfavorable conditions for a ubiquitous high density Wi-Fi network, owing mostly to the lofty ceiling heights and construction components. Read More »
Tags: 2.4 GHz, access point, antenna, antennas, AP, architect, barcelona, beamforming, cell isolation, cleanair, ClientLink, convention center, coverage, deployment, design, device, event, fira gran via, GHz, hardware, HD, HDX, high density, infrastructure, interference, management, mobile, mobile world congress, mobility, mwc, network, networking, radio resource management, rf, RRM, rx-sop, site survey, site visit, tech, technology, venue, wi-fi, wifi, wireless
It’s always interesting and often entertaining to observe how competitors promote their products and what they choose to focus on—and more importantly, what they choose not to focus on and what they hope people won’t ask questions about.
Consider yet again how a competitor chooses to position their “purpose built” AP vs. the Cisco Aironet 3700 802.11ac Access Point Series.
This competitor frequently (and somewhat obsessively) points out that its 802.11ac AP has dual “active” 800 MHz cores while the Cisco AP3700 has only one “active” 800 MHz core. This is not completely true since it completely overlooks the fact that the Cisco AP3700 also has a dedicated CPU core and DSP for each radio subsystem.
Furthermore, it also overlooks that the dual “active” cores in the competitor’s AP share 512 MB of DRAM. The single “active” core of the AP3700 has dedicated 512 MB of DRAM. Also each radio subsystem has a dedicated 128 MB DRAM (for 768 MB total DRAM in the AP3700).
Why is all of this important? Read More »
Tags: 11ac, 802.11ac, access point, AP, architecture, ASIC, client, compute, Computing, design, device, DRAM, efficiency, hardware, HD, HDX, high density, Industry, infrastructure, LAN, MB, memory, memory management, Mhz, mobile, mobility, network, networking, performance, rf, system, wi-fi, wifi, wireless, wlan
As a business or technical leader, you know you need to protect your company in a rapidly evolving mobile ecosystem.
However, threats are not always obvious. As malware and attacks become more sophisticated over time, business decision makers must work with technical decision makers to navigate security threats in a mobile world.
I’m excited to introduce a new blog series, authored by Kathy Trahan, which will explore the topic of enterprise mobility security from a situational level and provide insight into what leaders can do now to mitigate risk.
This first post will discuss the security concerns presented by the rapid-fire growth of BYOD (Bring Your Own Device) and how implementing specific policies can help organizations reap the benefits of true mobility now and in the future.
Senior Security Solutions Marketing Manager
With the increasing amount of tablets, wearables, and other connected “things” in the workplace, it’s no wonder that the BYOD trend is causing a dynamic shift in security policies and protocol.
This heightened focus on security only increases when the security threat evolution shows that attackers seem to stay one step ahead of the security measures in place to stop them. And while the BYOD movement does present special challenges to ensuring data security, it also affords BDMs and TDMs an opportunity to collaborate and come up with security solutions that balance the need to secure company assets while still allowing employees to conduct business on devices that are familiar and comfortable to them.
As enterprises look for ways to improve productivity, efficiency, and flexibility for their workforces, mobility has become a key factor. A Gartner survey predicts that by 2017, half of employers will require their employees to provide their own devices for work purposes. And as use of and reliance on mobility increase, so does the need for security policies that allow employees to function in a work world that extends beyond their cubicle and office walls.
Read More »
Tags: Cisco, device, future of mobility, mobility, navigating security, security, Security Threats