Yesterday, Cisco announced that we closed on the acquisition of Cloupia. Cloupia is now officially part of Cisco and a very exciting new addition to our Unified Management software portfolio.
Ever since the news broke about Cisco’s intent to acquire Cloupia, I’ve been asked how this fits with our other data center and cloud management software products. In short, Cloupia’s strength is in converged infrastructure management and it’s a powerful complement to Cisco Unified Computing System (UCS) Manager as well as our cloud management software.
The Cloupia Unified Infrastructure Controller extends the value of UCS Manager and provides deeper compute, storage, and network provisioning for converged infrastructure solutions including FlexPod, ExpressPod, Vblock, and VSPEX. It delivers a unified control point for this infrastructure, with physical and virtual resource management that can be combined with our Cisco Intelligent Automation for Cloud solution. There are also potential synergies with other management software products in our portfolio including Cisco Network Services Manager and Cisco Virtual Network Management Center for the automation and provisioning of network resources.
Last week, I was at the Gartner Data Center Conference in Las Vegas where I spoke with several analysts, customers, and partners about this new addition to our software portfolio. I’ve used the graphic below to illustrate our perspective on the management requirements for cloud computing – showing how infrastructure management provides an essential foundation for cloud management and orchestration.
One of the key take-aways from the feedback I heard at the conference was that Cisco has a highly differentiated position in the data center and cloud management market. Many of our competitors have resource management for virtual compute, but their functionality to manage physical resources is limited; few have the ability to manage storage and network infrastructure.
With Cloupia, we’ve strengthened Cisco’s ability to manage both physical and virtual resources across compute, storage, and network infrastructure. Now IT administrators can quickly setup and configure Unified Data Center solutions built around our best-in-class Cisco UCS and Nexus products, from within a single management console – improving both IT speed and agility.
And how does this fit with Cisco’s existing cloud management products? Like peanut butter and jelly, infrastructure management and cloud management are actually quite different. You can refer to this blog post by my colleague Wayne Greene for an overview and some key distinctions. But, like with peanut butter and jelly, when you put the two together – it’s a great combination. That’s the vision we have for Cloupia and Cisco Intelligent Automation for Cloud: better together. Spread it on some UCS, and it’s PBJ time.
As with many software acquisitions in this space, we recognize that there are some areas of similar functionality across our management products – and our product engineering teams will be addressing that in our roadmaps going forward. Now that the acquisition has closed, our teams can focus on this collaboration and integration. The graphic below illustrates how Cisco Intelligent Automation for Cloud will use Cloupia’s northbound API to consume physical and virtual resources in a Vblock, FlexPod, VSPEX, ExpressPod, or other Cisco converged infrastructure solution.
Converged infrastructure management from Cloupia is the foundation for dynamically provisioning compute, storage, and network resources. Process orchestration is required to manage the end-to-end workflow, bringing infrastructure automation together with business policies and your existing IT operations environment. And as James Staten of Forrester pointed out in a recent blog post, it requires a portal interface and service catalog to “unify enterprise-cloud consumption” across application and infrastructure services, and across private and public clouds.
One way to look at this synergy is to think about the “supply chain” for your IT services: spanning converged infrastructure management, process orchestration, and the end-user service catalog. At one end, you have the factory – it’s where you put together the raw materials (VMs, LUNs, blades, switches), configure the resources, and control the infrastructure. Then you have logistics for transportation and warehouse management, including third party intermediaries – that’s the process orchestration and integration with other operational systems. And finally, every cloud needs a storefront – that’s the service catalog and self-service provisioning experience for IT consumers.
To push the analogy a bit further, let’s start with some raw ingredients. Take coffee* as an example – sounds simple and straightforward, like infrastructure. But is it?
Starbucks claims to have 87,000 combinations on their menu. It can get pretty complicated (like a grande decaf no-whip skinny peppermint white chocolate mocha with an extra shot).
In much the same way, infrastructure-as-a-service may sound simple. Isn’t it just a few basic ingredients with compute, storage, and network? But think about all the variations and service options (like backup or 24×7 support) required for enterprise application hosting. Even if you’re using the same infrastructure components, it’s much more than provisioning VMs, LUNs, and VLANs.
When you do it right, you can hide all this complexity from the end user. The power of the apparent simplicity in the Amazon.com catalog interface, combined with their logistics and supply chain operations behind the scenes, is what fueled the company’s success in e-commerce. And while your IT service catalog may not have the millions of SKUs that Amazon.com sells on their website (or the 87,000 options on the Starbucks menu), customer satisfaction and operational efficiency is just as important to managing your infrastructure and IT services.
That’s the value of converged infrastructure management when combined with cloud management: providing a simple and easy-to-use experience with on-demand provisioning, along with governance and process orchestration, to deliver the right services at the right time at the right cost to your IT consumers.
And that’s our vision for the addition of Cloupia to Unified Management. Better together. Please join me in welcoming Cloupia to the Cisco team.
*Thanks to Kevin Kelling (@BlueShiftBlog) for the analogy.
Tags: Cisco Intelligent Automation for Cloud, Cisco UCS, Cloud Management, Cloupia, IaaS, Infrastructure Management, intelligent automation, orchestration, unified management
When building a cloud, scale it out.
Cisco Intelligent Automation for Cloud architecture and topology options enable scalability, availability, and geographic distribution. This white paper discusses several options, their strengths and uses, and the technical details underlying these options.”
Cisco IAC Availability, Scalability, and Geographic Distribution White Paper is available in the Cisco support community (log in needed)
Here’s an excerpt:
Cisco Intelligent Automation for Cloud (IAC) is a software-based solution for managing hardware infrastructure tasked with delivering various IT services as-a-service (XaaS). Cisco IAC provides configuration “content” to help customers rapidly deploy service-delivered, self-service enabled IT services on certain hardware architectures. Consulting services from Cisco Advanced Services or Cisco delivery partners can use the IAC infrastructure to create custom services for customers. This white paper discusses the software underpinnings of these services and options for deployment that provide scalability and resilience for large enterprises or service providers.
The major platform products which make up IAC relevant to a scaling and resiliency discussion are:
- The Cisco Cloud Portal – The dynamic, tailored end-user web site where customers and administrators can browse available services and options, and order new services or changes to existing services. This element consists of a web tier which interacts with the browser to expose the Portal UI and an application tier which includes the Portal and Service Catalog. The Service Catalog provides the menu of available services, including new-service and update-service requests, as well as definitions and configurations for roles, business rules, dynamic form rules, and entitlement.
- Cisco Process Orchestrator – The delivery engine that makes the Move/Add/Change/Delete (MACD) changes to the steady-state configuration of the computing, network, storage, and application infrastructure (“Infrastructure”) needed to deliver the requested new service or service change. Orchestrator processes automate workflows which interact with applications, systems, and devices in the environment.
- A database stores configuration, state, and runtime information from the above systems.
- Cisco Network Services Manager (NSM) Server – a specialized engine for network provisioning. Cisco Network Services Manager’s policy-driven approach allows clouds to be created within single or multiple network Points of Delivery (PoDs), each with potentially different and unique offerings and operational behaviors.
- Cisco NSM Controller – a local element near network devices within a network PoD which performs direct device interactions to achieve network provisioning at the direction of the NSM Server.
- Cisco Server Provisioner – provides bare metal provisioning (remote installation) of an OS or hypervisor on a physical or virtual server, as well as bare metal imaging for system cloning and backup.
Tags: Cisco Intelligent Automation for Cloud, cloud, Cloud Computing, Cloud Management, data center, intelligent automation, orchestration, unified management
Earlier this week, I was joined by Brian Cinque of Cisco IT, Rodrigo Flores and Yair Dolev of our Cloud & Systems Management Business Unit to run a Cloud workshop before the Cloud Expo in Silicon Valley. We had a very interesting group of attendees that were mostly building private clouds with some public cloud builders. We discussed a variety of topics such as:
- To the Cloud and the Big Themes
- Private Cloud Success: Cisco IT
- What type of Cloud are you building (and for whom)?
- Best practices of successful cloud builders
- Panel: Storytelling about other successful clouds.
We had great demand for sharing the slide deck that we used so here it is. Enjoy.
Hear more from @cloud_wayne
Tags: Cisco cloud, Cloud Computing, Cloud Management, intelligent automation, orchestration, unified management
The release of Cisco Intelligent Automation for Cloud 3.1 (Cisco IAC) begins to address one of the key questions of our customers who are building public and private clouds: How can I automate the network services configuration in my data center pod to enable policy-based network infrastructure as a service for my customers?
Some of you may be familiar with the Cisco Network Services Manager (Cisco NSM), part of the Intelligent Automation software portfolio. With the release of Cisco IAC 3.1, Cisco NSM is now integrated with and bundled as part of Cisco IAC, laying the foundation for infrastructure as a service.
Let’s take a look at some of the features in NSM for Cisco IAC:
Read More »
Tags: Cisco Intelligent Automation for Cloud, Cisco UCS, CiscoIAC, cloud, Cloud Computing, Cloud Management, IaaS, intelligent automation, orchestration, private cloud, Unified Data Center
Guest Blogger: Jamie MacQuarrie (@JMacQuarrie) has been working on Cisco’s cloud solutions, strategy and alliances since joining Cisco with the acquisition of newScale in April 2011. At newScale, he held product management positions focusing on data center automation and the evolution of traditional data centers to cloud operating models. Prior to joining newScale, he held product management positions at BMC Software and IT management positions at Washington Mutual bank. He started his career at Marimba, which was acquired by BMC Software in 2004.
We’re now into November, and though Halloween has come and gone, Cisco still has one last treat for everyone: Cisco Intelligent Automation for Cloud 3.1.
There have been a number of blog posts on the veritable cornucopia of features in IAC 3.1, so instead I’ll offer up this fun look at cloud maturity and extend the Halloween season just a little bit longer.
So tonight at 3am, long after your kids have gone to bed and you’re wired from eating all of their candy, instead of surfing the web trying to find the bottom of the internet, let me suggest a few more productive activities:
- Take a look at the Intelligent Automation blog posts
- Figure out what kind of Jack o’ Lantern your cloud strategy resembles
- Take your actual Jack o’ Lantern off your porch before it start attracting flies
And yes, that is a photo of a carved watermelon….It’s more popular than you might think.
Tags: cisco IAC, Cloud Management, data center, intelligent automation, orchestration, unified management