The first Industrial Ethernet Book was published in 1999. Since then it become an excellent information source for industrial networking and communication technology, and aims to provide unbiased editorial views focused on both process and discrete manufacturing industries. The editorial content is aimed at end users, system integrators and vendors within factory automation and process automation.
The article starts with the recognition that “Increasingly ‘smart’ devices, which include radio frequency identification (RFID) tags and sensors that have advanced diagnostics, are contributing to the billions of devices now connected to IP networks. This proliferation of smart devices is referred to by some as the ‘Internet of Things’, and it is projected to grow to trillions of devices that will be connected using the emerging IPv6 protocol (ref1). For manufacturers, a growing number of connected smart devices promises to revolutionise portability, mobility, context-aware condition and use of critical assets.” Read More »
John Deere, working with integration and technology partners Prime Technologies (now Kubica) and AeroScout, used the existing Cisco Wi-Fi networking nodes that it had already installed throughout the facility to avoid the expense of installing RFID readers for a new manufacturing solution.
John Deere MaxEmergeXP
Here’s the story: John Deere’s Seeding Group factory in Moline, Ill. was seeking an automated solution to improve on its manual work in process manufacturing system. It wanted to increase efficiency in the way it replenished welding material as well as improve the way it carried out processes at its assembly stations at the plant. The factory in question assembles John Deere’s row-crop planter machines -- the MaxEmerge XP range - that are used by farmers to deposit a variety of seed in soils and seedbeds.
The new system uses a wireless back-haul to a Cisco infrastructure that enables the SAP, reporting and programmable logic controller (PLC) systems to communicate live. It’s intended to improve material replenishment and reduce delays caused by waiting for materials in its welding areas. It allows the equipment manufacturer’s kitting staff to boost material replenishment speed, and allows assembly workers to prepare for specific equipment as it approaches their assembly stations. The RFID Journal Story goes into excellent detail on the wip process and the process improvement, but I did want to reiterate some of the key business metrics:
“Our goal was to improve Takt time *,” says Shay O’Neal, John Deere Seeding Group’s project manager, who expects the reduction to increase from what he estimates may be about 5 percent improvement in Takt time thus far. He reckons there has been a 40 percent reduction in cycle time because of the improvement in replenishment. He has also seen a decrease in overtime work undertaken by kitting staff at the welding station. “I was pleasantly surprised to see how well the system met our needs,” O’Neal said in the RFID Journal article.
John Deere has seen a 40 percent increase in efficiency in welding due to improvements in material replenishment and fewer delays caused by waiting for materials in its welding areas.
On the assembly line, the system provides a view into the work in process (WIP), which thus far has reduced the cycle time (Takt) it takes to assemble a single product by about 5 percent.
Since existing Cisco Wi-Fi nodes read the RFID tag of each seeder as it passes from one assembly station to another, indicating where it has been and what its next assembly location will be, John Deere avoided the expense of installing RFID readers.
Congratulations to Boeing on shipping it’s first 787 Dreamliner to ANA (All Nippon Airways). The world has been waiting and US Manufacturing has delivered. But it’s not just US Manufacturing -- suppliers as far away as Australia, Italy, Japan and Russia, to name but a few countries have been working with Boeing Engineers to bring the airplane to market -- and using Cisco or Cisco Partner technologies to do so!
The video, courtesy Associated Press’ YouTube Channel, shows the first Boeing 787 Dreamliner Airplane being handed over by Jim Albaugh, President and CEO, Boeing Commercial Airplanes, to ANA’s President and CEO - with a large key!
There’s been a lot of buzz on the Internet about the way Continental Tire of the Americas has vastly improved its manufacturing process. They adopted an innovative solution based on a Cisco architectural networking approach provided by Cisco Partner Applied Group combined with AeroScout’s asset tracking solution and a inventory management system from Global Data Sciences enabling their manufacturing facility achieve a 20 percent reduction in component tire losses. Now that’s significant!
Chet Namboodri interviews Peter Granger about the benefits Continental Tire is achieving from the Cisco Unified Wireless based manufacturing/wip solution
It was a real pleasure for me to take part in the Customer case study event organized by Cisco, AeroScout and Global Data Sciences for me to speak about the Cisco contribution. The video gives a short summary as Chet Namboodri, Cisco Industry Blogger-in-Chief and Global Managing Director of Cisco’s Manufacturing Industry Marketing interviews me about what was said, and the benefits Continental expects.
That event is where I met up with folks from Continental, AeroScout and Global Sciences to hear from the customer first hand how the solution is increasing production and efficiency in its North America manufacturing plant. That plant is located in Mount Vernon, Illinois, and it produces more than 1,000 different tire SKU’s in its 60-acre (2.6 million square-foot) facility.
The implemented solution leverages Continental Tire’s Cisco Unified Wireless Network to add a Real-Time Location System (RTLS) and automated Work-in-Process (WIP) tracking without having to install a proprietary network of readers and sensors. That’s key. Cisco provides standards-based solutions that work well with a customers backhaul, which, for most customers is also Cisco. Cisco’s Architectural approach means networking elements and processes work well together with ‘compatibility’ tested solutions such as those from AeroScout.
Many of you have asked me and my team about the session codes for the new Manufacturing Industry Industrial Intelligence day on 12th July 2011 and how to register for the exclusive sessions if you’re attending Cisco Live! So here’s the scoop:
Since many of you have a full conference registration package, you have access to Industrial Intelligence Day as part of your pass. Yes -- we made it possible! You can game the system. We made it easier than Groupon!
You can sign up for the following 3 sessions on CiscoLive Scheduler at https://www.ciscolive2011.com/scheduler (use your login you received with your confirmation) and just click ‘add to schedule’.
The great thing is you can now win an iPAD2by attending these sessions*
Please note that all 3 sessions will all be conveniently held in the same room -- Mandalay Bay F on Tuesday, July 12th, starting with a hosted breakfast at 7 am. An informal networking hosted lunch is also included as part of the day. Read More »