The We’re Listening Blog Series: 3 Way RMA Process Speeds Up Service Contract Updates
Over the past few months, the We’re Listening blog has brought you ongoing news about updates to our RMA processes, and the improvements keep on coming. I’ve asked Jim Fuller, Senior Director of Services Entitlement, to return to the blog to share details on the new 3-Way RMA process. The new process represents a significant improvement for many of our customers and partners, and in the spirit of the We’re Listening blog, was undertaken by Jim’s team in direct response to customer and partner feedback. Share your thoughts on other ways we can simplify your interactions with Cisco, and your suggestions may end up as new capabilities featured on the blog!
By Guest Contributor Jim Fuller
Our partners provide constant feedback to tell us how we can improve their experience doing business with Cisco. One of our partners’ number one requests is to help them create an RMA via a single step, versus opening a support case with Cisco to remedy contract updates as a result of RMA transactions.
We heard your feedback, and if you’re a partner who “self-spares” (spares inventory from your depot) or a customer who contracts with a partner who self-spares, your Return Material Authorization (RMA) process just became easier. We’ve introduced Partners 3-Way RMA/Self-Sparing.
With this new process, service contracts are automatically updated with the associated serial number swaps when processing 3-Way RMAs. Available now, the new capabilities provide the following benefits:
1. Delivery of an automated RMA process that supports 3-Way RMA transactions at the time of RMA creation
2. Two serial numbers can now be entered at the time of RMA creation for those partners that self-spare, via the Service Order RMA Tool (SORT):
- The serial number of the claimed defective part from customer network
- The serial number of the spare part used by the partner to replace the claimed defective part on the customer’s network
3. Ability to minimize or even eliminate partner overhead to monitor and coordinate contract swaps
Previously, the Partner Self-Sparing model was not systematically supported making equipment difficult to track. Without a standardized process, contract and installed base updates had to be performed manually via a support case process. Now, systematic contract updates will occur at the time of RMA shipment reflecting the spare part (replacing the claimed defective part) on contract, making it easier to do business with Cisco and drastically reducing support cases.
To date, more than 175 partners globally have been enabled, with an RMA success rate of 95%. In FY14, we’re focused on reducing contract cycles and the number of customer escalations even further.
Please contact your Cisco Partner Support Development Manager (PSDM) for further information about enabling these new capabilities in support of your 3-Way RMA/Self-Sparing needs.