Cisco Logo


CiscoHome

Okay Linksys E-Series router owners, we had some new firmware upgrades to
our popular E-Series products including:  E1500, E2500, E3200 and E4200.
The IPV6 support will help your router work correctly when service providers
migrate their networks over to the new Internet protocol.  Downloading this
firmware will make sure your router supports their networks.  Also if you
download the new firmware your router can automatically detect if there is
IPv6 traffic on the Internet port.  If there is, it will be able to route
that data between the Internet and the user’s local computers. Cool uh?!   
If you haven’t downloaded the new firmware yet – check out what we’ve added,
enhanced and some of the things we fixed:  Yea – it’s Linksys being committed
to giving you the best experience possible!

Linksys E4200 – Maximum Performance Dual Band Wireless-N Router

Last Release Date:           Sept 28, 2011

Last Firmware version:  1.0.03 (build 14)

To download the firmware go here and click on the Downloads tab in the middle of
the page.  Then look to the left side of the page and click on Select Hardware: 
Version 1.0 – then follow instructions on downloading.

Linksys E3200 --  High Performance Dual-Band Wireless-N Router

Last Release Date:   Sept 28, 2011
Last Firmware version:  1.0.02 (build 9)
To download the firmware go here and click on the Downloads tab in the middle
of the page. Then look to the left side of the page and click on Select Hardware: 
Version 1.0 – then follow instructions on downloading.

 Linksys E2500: Advanced Wireless-N Dual Band Router

Firmware version:   1.0.02 build 4
Release date:      September 2, 2011
To download the firmware go here and click on the Downloads tab in the middle of
the page.  Then look to the left side of the page and click on Select Hardware: 
Version 1.0 – then follow instructions on downloading.
Linksys E1500 – Wireless-N Router with SpeedBoost
Release Date:     Aug 17, 2011
Last Firmware Version: 1.0.02  (build 08) 
To download the firmware go here and click on the Downloads tab in the
middle of the page.  Then look to the left side of the page and click on
Select Hardware: Version 1.0 – then follow instructions on downloading.
The Linksys E1550 Wireless-N Router is planned for firmware update and IPv6
ready Logo Phase-2 (Gold) support in a few weeks – please check out website
for updates.
It’s a good idea to check our Support pages at www.linksys.com every few months
to make sure you have the latest firmware.  Firmware helps insure you have the
latest enhancements as well as fixes issues that could be impacting the
performance and use of your router.  
Happy Downloading!

In an effort to keep conversations fresh, Cisco Blogs closes comments after 90 days. Please visit the Cisco Blogs hub page for the latest content.

8 Comments.


  1. As usual, I see no intention to support IPv6 on older powerful devices, such as Linksys WRT320N (http://homesupport.cisco.com/en-eu/support/routers/WRT320N), the most recent firmware for this device is dated 2009.

       0 likes

    • HI Milu,
      Thanks for reaching out — the WRT320N is an older Wireless-N router and unfortunately the router does not have enough memory to hold the IPV6 firmware. The new Linksys E-Series routers as noted in the above will have the IPV6 support.

         0 likes

  2. What about the E1200?

       0 likes

    • Unfortunately the E1200 V1 will not be able to support IPV6 firmware due to memory on the router.

         0 likes

      • Hi Karen;
        Does any of the E-Series support snmp 1,2 or 3?
        How about syslog?

           0 likes

        • Hi Rene, — unfortunately the Linksys E-Series routers don’t support SNMP or Syslog. I know that our Small Biz router line up support these – so if you are looking for a router with these features – you might want to check out small biz line up: http://www.cisco.com/smallbusiness

          Karen

             0 likes

  1. Return to Countries/Regions
  2. Return to Home
  1. All CiscoHome
  2. All Security
  3. Return to Home