In my previous blog post, I highlighted some of the benefits being seen by customers using the Cisco’s Unified Computing System (UCS®) from Case Studies. Today I will drill down on cable reduction.
Why are customers seeing an 80% reduction in cabling and 75% in associated costs? Using a 10 Gigabit Ethernet unified network fabric – Cisco’s unified fabric technology reduces cost by consolidating Ethernet, Fibre Channel, and management. This “unification” eliminates the need for multiple separate sets of adapters, cables, and switches for LANs, SANs, and high performance computing networks. Cisco’s Unified Fabric uses a low-latency, lossless 10-Gbps Ethernet/FCoE foundation that enables a “wire-once” deployment model in which changing I/O configurations no longer means installing adapters and re-cabling racks and switches. With Cisco UCS you just add cables.
Here are three customer examples.
Hay Group – “With the Cisco UCS, we consolidated from 540 to 12 cables, a 44-to-1 ratio,” says Butler. [Robert Butler, Global CIO Hay Group]
Galliker Transport AG – “Where we previously needed 80 cables, we now only need eight: a reduction by the factor of ten. This not only cuts down the investment required, it also simplifies scalability. Installation and maintenance work are also substantially reduced.”
NetApp – In addition, using the converged network adapter on the Cisco UCS instead of separate Ethernet and Fibre Channel adapters enabled the company to decrease the cable count by 78 percent, from 1440 to 250.
For more information on how Cisco UCS is delivering on Cisco’s Unified Computing Vision, see the At-A-Glance.
Would you like to learn more about how Cisco UCS can help you? There are more than 250 published datacenter case studies on Cisco.com. Additionally, there is a TCO/ROI tool that will allow you to compare your existing environment to a new UCS Solution. For a more in-depth TCO/ROI analysis, contact your Cisco partner.