Comments on: Cisco EMC VSPEX for VMware V250…CVD is published! http://blogs.cisco.com/datacenter/cisco-emc-vspex-for-vmware-v250-cvd-is-published/ Sat, 25 May 2013 13:50:10 +0000 hourly 1 By: Paul Teel http://blogs.cisco.com/datacenter/cisco-emc-vspex-for-vmware-v250-cvd-is-published/#comment-678834 Paul Teel Thu, 11 Oct 2012 16:01:56 +0000 http://blogs.cisco.com/?p=85937#comment-678834 Adam, thanks for the question and the close read of the doc. This is an editorial mistake. It should be read as 2204 not as 2104. I have alerted the BU on this and they will make the change and publish a revision.

   0 likes

]]> By: Adam E http://blogs.cisco.com/datacenter/cisco-emc-vspex-for-vmware-v250-cvd-is-published/#comment-678748 Adam E Thu, 11 Oct 2012 12:10:30 +0000 http://blogs.cisco.com/?p=85937#comment-678748 Thank you for publishing and thank you and the team for their hard work putting these CVD’s together!

One question, though. Why would you use the 2104XP FEX’s with 6200 series FI’s and VIC1240′s? That seems like an obvious error and prevents the customer from taking advantage of all the Gen2 hardware features.

   0 likes

]]> By: Paul Teel http://blogs.cisco.com/datacenter/cisco-emc-vspex-for-vmware-v250-cvd-is-published/#comment-677340 Paul Teel Mon, 08 Oct 2012 17:53:11 +0000 http://blogs.cisco.com/?p=85937#comment-677340 Dr Wong, thank you for taking the time to reply. Cisco and EMC are working very hard together to bring relevant VSPEX solutions to market that have been validated and tested.

   0 likes

]]> By: Dr. Jose A. Wong - Perez http://blogs.cisco.com/datacenter/cisco-emc-vspex-for-vmware-v250-cvd-is-published/#comment-676383 Dr. Jose A. Wong - Perez Sat, 06 Oct 2012 14:33:15 +0000 http://blogs.cisco.com/?p=85937#comment-676383 …Congratulations…for many years I had been using VMware products, and is good to know what Cisco provides in this arena…thanks for sharing it…regards from PR…

   0 likes

]]>